Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
I have an 88 Wagoneer with the small Mitsu-starter and the relay/Switch thingy on the passenger side inner fenderwell. I cannot start the Jeep with...
Last post
Try adjusting yours first. After I replaced the dash harness in mine it wouldn't start. It had gotten out of adjustment from unplugging the two MTA's...
How do I adjust the mode rod, and how do I get the mode and range levers aligned? I ask because I can't shift into Lo and the first order of business...
This is a little off topic but i have a question. The wife's 91 grand waggy uses a starter like this:
I've had a lot of luck with this design which...
Last post
If you are referring to the Ford style starter, O'Reilly doesn't off a new one only reman. You can get a lifetime or a one year warranty and there is...
My 79 Cherokee (360, t-18, Dana 20) is finally getting close to roadworthy. I pulled the radiator to get cleaned and rodded, if possible, and figured...
Last post
All the little arm is for is to position the clamp in the right place on the fitting, however they are typically wider and a little heavier than your...
OK, need a little help w/ a electrical gremlin...
Left blinker works fine, unless I push on the brake, then it stays solid. Same thing w/ the...
Last post
Dimmer switch is working fine. New bulb solved all issues. In fact, besides the heater controls, most everything seems to be working well. Doesnt get...
Where can I get a new upper fuel fill hose? I've looked at BJ's and there only have the lower one. anyone have any creative idea to modify something...
Last post
As this post has a bit of age, thought I would see if there is any new info on replacing the filler hose on my 76
I'm trying to rebuild the A/C in my 1978 J10 and I'm at a loss. it was low on charge so I decided to restore it before recharging so I don't know if...
Last post
Okay now I'm getting it, it looked like the brown wire went to the fuse box but I couldn't figure out how that would work because it would be hot all...
Questiin.. as i was fixing my radiator today. Noticed my balencer is starting to get the rubber pull out.. only like 1.3 of an inch so far so not too...
Last post
You can source a used balancer from a salvage yard. RockAuto has the Dorman balancer for a reasonable price if you prefer a new one.
The radiator on my 90 has been leaking slowely but now its like a bad faucet... dripping even when cold really quickly. the radiator is about 1 inch...
Last post
Nah, as long as it's yellowish-copper colored you should be ok.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
