Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Ouray 2023
Replies: 35
by
Grand_Wag_85 »
Fri Jul 22, 2022 11:36 am
» in
Ouray
First post
**2023 FSJ Ouray Invasion Dates**
Copied from Aubreyanna's post on the FB page
July 17th - July 23rd
Our KOA contact, Ilka has been kind...
Last post
Are we all getting ready ?
Sent from my iPhone using Tapatalk
35 Replies
107968 Views
Last post by MReese Wagoneer
Thu May 23, 2024 8:16 pm
Forum Guidelines
by
Stuka »
Tue Apr 16, 2013 6:35 pm
Topics that do not fall under this area as described will be moved or deleted. Which ever is more appropriate.
1: Topics or posts which are intended...
0 Replies
20865 Views
Last post by Stuka
Tue Apr 16, 2013 6:35 pm
AMC 401 Break In Procedures
Replies: 9
by
Jevman »
Wed May 17, 2023 11:46 am
First post
What are your thoughts on a break in for an AMC 401 that has a Pro Flow 4 that needs to be set up also. Do you get the Pro flow running right second...
Last post
Update from Edelbrock, (Engine is started , turn idle adjustment screw on linkage clockwise to desired RPM 2000-2500. ) That simple with a new Pro...
9 Replies
856 Views
Last post by Stuka
Mon May 22, 2023 1:08 pm
Gen 1 Small Block Swap?
Replies: 26
by
OldFarmTruck22 »
Mon May 01, 2023 10:26 am
First post
I have an old Chevy 350 and a 700r4 K case transmission in the shed. Been thinking about doing a swap.
Trying to get better gas mileage and better...
Last post
You will push the fan though the radiator before the oil pan is the issue.
Somewhere I have charts that show all of the dimensions for the exact...
26 Replies
1758 Views
Last post by OldFarmTruck22
Tue May 09, 2023 12:27 pm
MSD Distributor Swap - Not So Simple!
Replies: 2
by
Scotty54 »
Wed May 03, 2023 2:51 pm
First post
Yesterday I set out to do a simple swap - remove the Prestolite system and install an MSD distributor and Street Fire ignition box. Simple, right?...
Last post
Glad you got it figured out!
2 Replies
422 Views
Last post by Stuka
Wed May 03, 2023 10:12 pm
J10 seat swap to 2015 Chevy
Replies: 10
by
Txflyer16 »
Thu Feb 16, 2023 6:37 pm
First post
Has anyone ever put 2015 Chevy split bench or similar into a J10 (successfully)? Pics and wisdom would be appreciated. Obviously there's some fab...
Last post
IMO most modern seats aren't that comfortable anyway; the Chevys and Jeeps especially just don't fit me right. I know the headrests are safer, but...
10 Replies
902 Views
Last post by sierrablue
Mon May 01, 2023 9:36 am
DUI distributor power source
Replies: 4
by
Horsman »
Thu Apr 20, 2023 7:15 pm
First post
Was wondering what the best place is to pick up 12 volts for my new DUI distributor. Working on a 79 Wagoneer with a 360 engine. The attached pic...
Last post
If you're eliminating the Duraspark system, and you're not going to use it again, I'd say pull it out. Can't cause you headaches later, unless for...
4 Replies
589 Views
Last post by sierrablue
Wed Apr 26, 2023 7:22 pm
Dual fuel tank ideas 77 wagoneer
Replies: 14
by
Sdsurfer »
Wed Feb 01, 2023 8:33 pm
First post
So I’m starting the process to replace the rear leaf springs and replace some electrical wires and re-run brake lines so mine as well drop fuel tank...
Last post
I have a filler extension but it's only the piece that runs from the neck to the inside of the frame. On mine, for the rest of it, a PO just ran a...
14 Replies
1441 Views
Last post by sierrablue
Thu Apr 20, 2023 2:24 pm
Green Vent from Fuel Filler to charcoal canister
Replies: 1
by
Renodemona »
Wed Apr 12, 2023 3:13 pm
First post
I have Fitech and no carb, I finally got around to cleaning up the charcoal canister as I don't have emissions either. I discovered that 2 out of the...
Last post
Covered in the TSM. There are some good pictures there.
The green pipe is nylon, which Jeep used for vapor piping in that era. You need a vent from...
1 Replies
356 Views
Last post by tgreese
Wed Apr 12, 2023 3:43 pm
1978 Cherokee Tank Lines.
Replies: 5
by
bcudda »
Mon Apr 03, 2023 12:44 pm
First post
Can anyone tell me how the fuel tank fill and vent lines run on a 1978 Cherokee? Do they run through the frame cutout where the rear brake line does?
Last post
According to the book, through '77 have the same picture of the same steel tank with a larger filler neck. '78-79 are still steel but go to the...
5 Replies
476 Views
Last post by tgreese
Sat Apr 08, 2023 11:51 am
Got my new lift kit (Skyjacker), installed!
Replies: 5
by
J7M46sn »
Tue Mar 28, 2023 11:14 am
First post
I bought a 4 Skyjacker all spring lift kit back in November, and started the install in December. Between work, my back going out, and crappy Ohio...
Last post
Sounds like Patients and perseverance paid off, congrats!! 🎊
5 Replies
613 Views
Last post by Yeller
Wed Apr 05, 2023 10:56 am
J10 rear spring sag under load
Replies: 19
by
rurcon »
Wed Mar 22, 2023 9:21 am
First post
Hey all, the previous owner of my '79 J10 installed a Rough Country 3-inch lift kit (replacement springs in front, blocks in rear), and so I've got...
Last post
My 90 when i got it just me sitting on the tailgate at 300 lbs would drop the Jeep like 3 inchs...
I just got new springs for it.. 1440lbs capacity...
19 Replies
1164 Views
Last post by candymancan
Wed Apr 05, 2023 3:40 am
Time for A/T Tires
Replies: 7
by
Scotty54 »
Tue Mar 28, 2023 11:15 am
First post
Replacing my tires (30x9.5) and stock wheels with 15 x 8 aluminums and 31 x 10.5 x 15 tires. I have a 2.5 lift but even with the lift a 31 tire looks...
Last post
ive had bfg's on 4 vehicles 81 cj5, 91 cherokee xj, 75 cj5 currently and a new set for my 06 dodge ram 2500 and they have never let me down , ready...
7 Replies
736 Views
Last post by Srdayflyer
Mon Apr 03, 2023 11:01 pm
Best tires for truck now with 3" lift
Replies: 1
by
1978J10REDWHITE »
Wed Mar 29, 2023 2:55 pm
First post
Added a RC 3 lift and thinking about to taller meats on the Stock 15 rims.
The tires read 31 x 10.50 x 15LT.
Measured should take a 34's without...
Last post
I ran 34's on my J-10 with a 6 lift and it resulted in the rear fenders cutting the tires at full flex. So if you want 34's, you will need to drop...
1 Replies
356 Views
Last post by Stuka
Wed Mar 29, 2023 3:28 pm
3D Printed Parts?
Replies: 7
by
bcudda »
Mon Mar 20, 2023 9:16 pm
First post
Thought maybe a thread of all the 3d printed parts being made/used on these jeeps. I am working on a spacer for the MTS poly tank and the old top...
Last post
@SJohn 3D prints a bunch of parts--speaker grilles are the big one. You can check those out in the vendors section. Thanks for the shout out! I 3d...
7 Replies
698 Views
Last post by sierrablue
Sun Mar 26, 2023 11:02 am
Rusty's 6 inch lift for QT
Replies: 9
by
9.3x62 »
Sat Mar 11, 2023 2:31 pm
First post
Finally lifted my 79 waggy. Rusty's 6 inch kit. Nothing much to add in regard to the install process, everything I dealt with had been addressed in...
Last post
Will do. Tom Woods seems to have come up with solutions for a lot of folks.
9 Replies
767 Views
Last post by 9.3x62
Thu Mar 16, 2023 3:49 pm
Ball and Trunnion Conversion
Replies: 11
by
JWestfall »
Thu Sep 01, 2022 12:22 pm
First post
My 71 Wagoneer has a ball and trunnion joint on the driveshaft connecting to the Dana 20. Does anybody have a part number or source for a bolt-on...
Last post
When I ordered a new driveshaft the shop supplied the flange to bolt right up to the T-case. Sounded like it was a pretty common conversion for them.
11 Replies
1020 Views
Last post by JWestfall
Sun Mar 05, 2023 6:13 pm
Will this baffle work?
Replies: 7
by
RustyDusty »
Wed Feb 22, 2023 8:48 pm
First post
I finally received my Edelbrock 3731 (2 yr backorder!) and find that my stock baffle will not fit it without significant surgery. I have some...
Last post
Hmm, yeah. The original baffle seems more like a splash deflector than even the coarsest filter. If louvers are beyond your metal working capability,...
7 Replies
604 Views
Last post by tgreese
Fri Feb 24, 2023 10:36 am
Window, lock and mirror switch.
Replies: 2
by
86wagyproject »
Tue Feb 21, 2023 10:42 am
First post
I am thinking of redoing my door interior and was wondering if you can upgrade the window switch to a newer version like a window,lock and mirror...
Last post
You'd have to look at a wiring diagram of the donor and compare to the Wag.
Good time to go to relays.
2 Replies
348 Views
Last post by SJTD
Thu Feb 23, 2023 10:52 am
Mirror options
Replies: 11
by
thej10guy »
Tue Feb 07, 2023 6:27 pm
First post
What are people running for mirrors? I have 3 post mirrors on one truck and a different style of three post mirrors on my other truck but I am...
Last post
Nice rig @Jpswapmohn. I like the look of the painted mounts on there. I ended up ordering the mounts off bjs yesterday (along with $350 worth of...
11 Replies
804 Views
Last post by thej10guy
Mon Feb 20, 2023 4:06 am
Anyone have 3 link / 4 Link build threads, also airbags?
Replies: 12
by
CoconutFiasco »
Sat Feb 18, 2023 7:07 am
First post
Hi guys,
I am trying to fall back in love with the my Wagoneer, but I feel like every time I drive it theres some new issue. Im not new to project...
Last post
Also, from what I can tell on the airbags, the real trick is getting the right pressure in them. The way I understand it, you want to run them empty...
12 Replies
1025 Views
Last post by Stuka
Sun Feb 19, 2023 11:38 pm
700r4 swap
Replies: 22
by
sierrablue »
Tue Feb 07, 2023 5:46 pm
First post
So since I'm about ready for college, I'm gonna be doing a lot more cruising in the near future. I know that a diesel 700r4 will bolt up directly to...
Last post
Your welcome. I bet the shifter in the k5 will fit nicely in the existing hole, reshape the handle, sew up a boot and be done.
22 Replies
1024 Views
Last post by Yeller
Sun Feb 19, 2023 6:16 pm
86 Wagoneer Sniper EFI Ignition Wiring
Replies: 4
by
wagoneerdad »
Fri Jan 20, 2023 9:58 am
First post
Anybody running a Holley Sniper EFI on the AMC 360 Wagoneers? I'm looking for the best 12v wire to splice into for the ignition. Right now I have it...
Last post
I ran the sniper control wire to the chime module that I pulled since I was missing all the door switches so it always buzzed. Simple blade connector...
4 Replies
468 Views
Last post by Theduke
Sun Feb 19, 2023 1:05 pm
New Wheels
Replies: 15
by
OldFarmTruck22 »
Thu Jan 12, 2023 8:14 am
First post
I have the factory wide track 15 wheels on my 78 Chief. I'm thinking about going to an aftermarket 15 x 8 steel rim, Black with slots, with the...
Last post
I don't have a problem with the made in China stuff--my issue is when things don't line up/don't hold up to the quality of the originals.
My dad...
15 Replies
914 Views
Last post by sierrablue
Fri Feb 17, 2023 6:54 pm
Rear leaf springs, 4" lift, too short?
Replies: 14
by
J7M46sn »
Mon Feb 06, 2023 12:31 pm
First post
I recently ordered a 4 all spring lift kit from Skyjacker for my '77 J20 truck. Last night I tried to install one of the rear 4 lift leaf spring...
Last post
There’s a fix for that stiff front 😉😃🤐
Throw a diesel over it!!!! 😝
Oh wait you're a 4-link guy...
(not that I'm opposed to 4-links)
14 Replies
1076 Views
Last post by sierrablue
Wed Feb 15, 2023 3:50 pm
Center Caps
Replies: 1
by
sierrablue »
Tue Feb 14, 2023 6:34 pm
First post
So it's looking like I'm gonna be putting the slots on here pretty soon. I know a lot of people really like the stock, can-like center caps. I don't...
Last post
3d print up something simple and clean
1 Replies
252 Views
Last post by Yeller
Wed Feb 15, 2023 1:09 pm
Roller Rockers?
Replies: 2
by
OldFarmTruck22 »
Thu Feb 02, 2023 1:12 pm
First post
The 78 360 has 1.6 ratio rockers, right?
If I wanted to get rid of the bridges and stock rockers, what roller rockers would you guys suggest? I was...
Last post
I tried the comp rollers for about 100 miles but was in a state of overbuilding and went for these:
1.6:1 is correct. Personally I don't think it's...
2 Replies
320 Views
Last post by dodgerammit
Sat Feb 04, 2023 1:00 am
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum