Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
When I got my truck, the front leafs were flattened due to a huge homemade bumper on the front. I replaced the bumper with a correct one and bought a...
Last post
Not likely the bumper contributed much at all to front sag, as any 40+ yr old front engine vehicle will suffer from this problem, due to the weight...
I've seen some guys use bed liner throughout the interior and even exterior, but has anyone used it just in the cargo area? My cargo area doesn't...
Last post
would the raised metal strip on the floor bump make sliding larger items difficult ? shouldnt it be flush. So the lower strips maybe should be raised...
Just thought I’d share my recent fuel pump woes in case it could help anyone. I recently had to replace two old failing fuel pumps— one on my 73...
Last post
I had a mechanical pump for 20 or 25k miles or so, and it gave up the ghost on me in early '23. Everything I read indicated that the replacement fuel...
Can anyone show me how you install a mechanical oil pressure gauge on an amc 360? Where do you put the pressure line? My stock gauge is not working,...
Last post
Install is pretty straight forward, should you go this route.
Remove the factory sending unit, and thread the flare nut for the line into this hole....
I'm getting a lot of belt noise and trying to see if my belts are routed correctly. I looked through the parts book and TSM and didn't see any early...
Last post
My 76 is odd it has 3 grooves on the crank. First back one is the power steering pump water pump and rear crank groove.
Hey everyone! I recently bought a 1977 Wagoneer. It's got the 401 engine, with PS, PDB, A/C, and Cruise. I'm located in Huntsville, Alabama. Wife and...
Last post
Welcome to the forum!
Looks like a pretty original example, is it an original z code? (401)
Yes, it’s an original Z code. I am 2nd owner. Spent...
Looking for the hardware that mounts the grille center insert on to the larger grille shell. The ones sold for the 86-91 are like plastic push in pin...
Last post
THANKS FOR THE INFO TIM. I MAY STOP BY ON MY WAY TO ORCHARD BEACH IN JULY
Just curious what you guys think. There isa 89 Gw in the jy ive been pulling parts off the last few days. Thinking of going back to get the 2150 off...
Last post
i would, espically if it has the altitude compensating bellows, that part alone is worth the price of admission ,i would check for any directional...
I'm completely rewiring my 79 J10 and I've got a few questions I'm hoping some of you guys might have the answers to.
The previous owner left a 21...
Last post
The wire size issue is more about the resistance of the wire, the length of the wire, and the contact resistance of the many additional switches and...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum