Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Well got the carb and been driving it for about a week now... she sounds good minus the hole in the exhaust... I forgot how anemic these things are... makes me scratch my head on what I was thinking rebuilding it. But I'm happy she drives
87 grand Wagoneer mostly stock
90 grand Wagoneer (stalled 5.3 project)
Cheapthrills wrote:Well got the carb and been driving it for about a week now... she sounds good minus the hole in the exhaust... I forgot how anemic these things are... makes me scratch my head on what I was thinking rebuilding it. But I'm happy she drives
87 grand Wagoneer mostly stock
90 grand Wagoneer (stalled 5.3 project)
good to read, but the late 80's are usually with 2.80ish gearing, which is rather dull... with standard tires 3.54 is a lot better... even 3.31 is a good kick...
Michel
74 wag (349 Kmiles... parked, next step is a rust free body)
85 Gwag (229 Kmiles... the running test lab)
Cheapthrills wrote:Well got the carb and been driving it for about a week now... she sounds good minus the hole in the exhaust... I forgot how anemic these things are... makes me scratch my head on what I was thinking rebuilding it. But I'm happy she drives
87 grand Wagoneer mostly stock
90 grand Wagoneer (stalled 5.3 project)
good to read, but the late 80's are usually with 2.80ish gearing, which is rather dull... with standard tires 3.54 is a lot better... even 3.31 is a good kick...
weeegoneeer wrote:Second that - the move from 2:73 to 3:31 was noticable. Still not screemin, but much better from a stop.
I do think the tow package from the late 80's may have had 3:31s still tho?
Glad to hear you're up and running cheapthrills - sounds like it's been a ride!
This wagon has 3 31s already. But yea she is doing good. I think personally that it's the intake, it's super flat. Holley street dominator.
It just doesn't have much "get up and go"
87 grand Wagoneer mostly stock
90 grand Wagoneer (stalled 5.3 project)
Cheapthrills wrote:This wagon has 3 31s already. But yea she is doing good. I think personally that it's the intake, it's super flat. Holley street dominator.
It just doesn't have much "get up and go"
87 grand Wagoneer mostly stock
90 grand Wagoneer (stalled 5.3 project)
sure at 6000' our engine are a bit flat... try to bump the timing up... in Ouray I cranked it to 23 degrees BTDC
Michel
74 wag (349 Kmiles... parked, next step is a rust free body)
85 Gwag (229 Kmiles... the running test lab)
Cheapthrills wrote:This wagon has 3 31s already. But yea she is doing good. I think personally that it's the intake, it's super flat. Holley street dominator.
It just doesn't have much "get up and go"
87 grand Wagoneer mostly stock
90 grand Wagoneer (stalled 5.3 project)
sure at 6000' our engine are a bit flat... try to bump the timing up... in Ouray I cranked it to 23 degrees BTDC
I'll try it and see what happens
87 grand Wagoneer mostly stock
90 grand Wagoneer (stalled 5.3 project)
So I put a 1inch spacer under the carb and it became a whole new animal.. but now I need to put a new throttle cable bracket, it makes the throttle cable just a bit too short.
87 grand Wagoneer mostly stock
90 grand Wagoneer (stalled 5.3 project)
Well I started to tear down the engine I pulled that had the nasty tick I mentioned in the beginning of this thread, just to see what the culprit was...
While it sounded like a lifter on the Driver side bank, the sound was prominent in the valve cover/head... I pulled the heads and there sounds like a peace of tin in side the head have yet to figure out what it is though.
87 grand Wagoneer mostly stock
90 grand Wagoneer (stalled 5.3 project)
i’ve found wire inside several amc heads, think it’s part of/left over from casting process. of course could be anything on old car. i’ve found some weird stuff inside engines.
After fighting with emissions with several trips to the mechanic with infrared machine (the emmisions place puts it on a dyno..... we got to breaking down everythig i did to the engine and how i did it....
I didnt install f@#$%!g piston rings correctly. The book didnt say anything and there wher no destructions with the rings......
Super high CO
the limit is 30.0 and im at 84.8
Rejetted the carb 32 times with new springs and metering rods, new cat ... yada yada yada.
She runs pretty good though
One more try in emissions place and if it dont pass im gonna pull my hair out then im gonna have it launched on the next space x flight
'84 GW with Nissan SD33T, early Chev NV4500, 300, narrowed Ford reverse 44, narrowed Ford 60, SOA/reversed shackle in fornt, lowered mount/flipped shackle in rear.
The rings where not faced, there is a top and bottom side to each ring (the rings are tappered) marked with a dot (dot to the top i guess) i didnt see that.