2017 swap meet

For all discussions related to the annual FSJ invasion of Ouray

Moderators: shimniok, srobertsfsj

User avatar

Topic author
derf
Posts: 1403
Joined: Mon Jun 04, 2012 9:10 am
Location: Littleton, CO
Contact:

2017 swap meet

Post by derf »

One advantage to being all together in one place is that we can swap parts without having to deal with all of the shipping costs. I think it would be a good idea for everyone who has something or wants to buy something could post up in one thread.

I have a stack of parts I'm not using any more that I'll be able to bring. I'll have to add some pictures later but off the top of my head:
  • Pair of burgundy seats from an 80's Grand Wagoneer in pretty good shape. The drivers seat has some wear but there are no tears or anything like that. $50 - Reserved
  • Sanden AC compressor bracket with bolts for the compressor (but not to bolt it to the block). $25
  • 80's V8 alternator brackets with bolts and spacers. $25
  • New aftermarket alternator to fit an 80's V8. $25 - Reserved
  • An assortment of V8 timing cover/water pump bolts. $free
  • Edelbrock Chromed steel valve covers for AMC V8s. $25
  • Thermostat housing for AMC V8s, complete with 3 port CTO vacuum switch. $free
  • I'm sure I have some misc. fasteners for the engine as well. $free
I'll have to dig through my parts bins to see if I have any more parts. And I'll post some pictures as well.

Edit: Parts that have sold have been removed. Parts spoken for have been marked reserved, pending sale.

I still haven't gotten to the pictures. I'll see if I can do that before I leave for Ouray.
Last edited by derf on Fri Jul 07, 2017 10:41 am, edited 2 times in total.
User avatar

tedlovesjeeps71
Posts: 2905
Joined: Fri Jul 22, 2016 4:39 pm

Re: 2017 swap meet

Post by tedlovesjeeps71 »

Hey derf, you got a pic or link to the bulltear valve covers? I may be interested.


Sent from my iPhone using Tapatalk
User avatar

Topic author
derf
Posts: 1403
Joined: Mon Jun 04, 2012 9:10 am
Location: Littleton, CO
Contact:

Re: 2017 swap meet

Post by derf »

tedlovesjeeps71 wrote:Hey derf, you got a pic or link to the bulltear valve covers? I may be interested. Image


Sent from my iPhone using Tapatalk
They discontinued them but reissued them. Here's the link to the reissued ones: http://www.bulltear.com/catalog/product ... 95e587fa86

Image

The ones I have are powder coated black with the raised part on the top machined smooth.

They look like this:

Image
User avatar

tedlovesjeeps71
Posts: 2905
Joined: Fri Jul 22, 2016 4:39 pm

Re: 2017 swap meet

Post by tedlovesjeeps71 »

Put me down for those sir, I'll take em!! I can send you the money if you like. That way, if I don't make Ouray, we can figure something out. I'm still hopeful I can make it.
Those will look sweet on my Scramblers 360.


Sent from my iPhone using Tapatalk
User avatar

Topic author
derf
Posts: 1403
Joined: Mon Jun 04, 2012 9:10 am
Location: Littleton, CO
Contact:

Re: 2017 swap meet

Post by derf »

tedlovesjeeps71 wrote:Put me down for those sir, I'll take em!! I can send you the money if you like. That way, if I don't make Ouray, we can figure something out. I'm still hopeful I can make it.
Those will look sweet on my Scramblers 360. Image


Sent from my iPhone using Tapatalk
You could just drop by this weekend. I'm in CO Springs.
User avatar

tedlovesjeeps71
Posts: 2905
Joined: Fri Jul 22, 2016 4:39 pm

Re: 2017 swap meet

Post by tedlovesjeeps71 »

Cool! It may have to wait for next weekend since I think HH6 has this weekend full up.


Sent from my iPhone using Tapatalk
User avatar

tedlovesjeeps71
Posts: 2905
Joined: Fri Jul 22, 2016 4:39 pm

Re: 2017 swap meet

Post by tedlovesjeeps71 »

Awesome. I'm guessing it's one of those dirt lots on Google maps? Haha.
Let me see what the wife has planned and we can arrange me coming for them. Thanks man!

Btw, Tapatalk is being a real PITA. Won't let me reply to your pm.


Sent from my iPhone using Tapatalk
User avatar

Topic author
derf
Posts: 1403
Joined: Mon Jun 04, 2012 9:10 am
Location: Littleton, CO
Contact:

Re: 2017 swap meet

Post by derf »

There's actually a couple of buildings built in the google map. And they have the foundation of the building I'm in showing in the picture.

will e
Posts: 5094
Joined: Sat Aug 18, 2012 8:21 am

Re: 2017 swap meet

Post by will e »

Make me an offer, I am anxious to get most of this gone. Some of it I am posting local too so it may be gone.
Things with an astrick I am going to bring to Ouray with me either way. set up a table near jerry.
What day do you all want to do the parts swap? How about wednesday? Or Thursday before/during/after the pot luck?

Used spare shafts for wide track. Came out of an 82 so D40 DD up front and amc 20 in the back.
New alloy wide track shafts for AMC 20

ADDED: Factory Trailer Hitch

Used d44 flat top knuckes from "Parts Mike" Good for doing a SOA

2 brand new in the bags AMC 20 rear bearing and seals from BJ's*

4 bolt 3 grove crank pully for amc v8 used
3 bolt 2 grove crank pully for amc v8 used

black ash tray with bracket ok shape*
Brown Ash tray, needs restoration, with bracket that has optional light*

Warn trailer hitch mount for winches. Used and scratched.
Warn roller fairlead. Used.

Used retangular headlights with buckets*

Two Used windoiw washer res. With motor. Dirty but in nice shape. No idea if the motor works.*

727 tf flex plate. Used but it is in very nice shape.*

Bumper guards - two - One is a bit beat up but the other is in decent shape*

5 almost new 8 lug aluminum rims. Cheap. One has some rash on it from a ratchet hold down. They may have a bit of scratches on them from a wheeling trip. I replaced these with some that had a tighter offset. No caps. Here is what they look like:



Image
Last edited by will e on Thu Jul 13, 2017 7:40 am, edited 1 time in total.
81 Waggy 'WILL E' Retired
82 Cherokee WT - SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau XRS Baja & 5 point retractable harness/Hella Aux lights/tuffy console/killer32 sliders/Evil Twin bumpers, rack and roll cage/WARN 8000/TT Fabworks steering brace/dual batts/custom TC skid plate/ARB fridge
User avatar

tedlovesjeeps71
Posts: 2905
Joined: Fri Jul 22, 2016 4:39 pm

Re: 2017 swap meet

Post by tedlovesjeeps71 »

@derf...
Thanks for letting me pick up the valve covers and getting me out of the house to help on a jeep that works. I had a blast. My back will hate me tomorrow but im glad to have had the opportunity!


Sent from my iPhone using Tapatalk
User avatar

Topic author
derf
Posts: 1403
Joined: Mon Jun 04, 2012 9:10 am
Location: Littleton, CO
Contact:

Re: 2017 swap meet

Post by derf »

tedlovesjeeps71 wrote:@derf...
Thanks for letting me pick up the valve covers and getting me out of the house to help on a jeep that works. I had a blast. My back will hate me tomorrow but im glad to have had the opportunity! ImageImage


Sent from my iPhone using Tapatalk
Thanks for all the help. :-bd

How's your back?
User avatar

tedlovesjeeps71
Posts: 2905
Joined: Fri Jul 22, 2016 4:39 pm

Re: 2017 swap meet

Post by tedlovesjeeps71 »

derf wrote:
tedlovesjeeps71 wrote:@derf...
Thanks for letting me pick up the valve covers and getting me out of the house to help on a jeep that works. I had a blast. My back will hate me tomorrow but im glad to have had the opportunity! ImageImage


Sent from my iPhone using Tapatalk
Thanks for all the help. :-bd

How's your back?
You're very welcome!
Back isn't happy. Yesterday was a little rough but today seems better. As much as it can suck, I refuse to keep it from letting me have a little fun and be somewhat helpful! Image


Sent from my iPhone using Tapatalk

Nikkormat
Posts: 3623
Joined: Sun Jun 29, 2014 11:45 pm
Location: Salt Lake City

Re: 2017 swap meet

Post by Nikkormat »

Hey guys, Wyatt is looking for two rear dog dish hub caps. They can be in rough shape they just need to snap on! He's a poor college kid, so he's willing to spend $20.

Like I said, they don't need to be nice. Just serviceable.
Gabe, "reformed" Jeep hoarder.

Nikkormat
Posts: 3623
Joined: Sun Jun 29, 2014 11:45 pm
Location: Salt Lake City

Re: 2017 swap meet

Post by Nikkormat »

And Roy, I think I'll take an alternator off your hands!
Gabe, "reformed" Jeep hoarder.
User avatar

Topic author
derf
Posts: 1403
Joined: Mon Jun 04, 2012 9:10 am
Location: Littleton, CO
Contact:

Re: 2017 swap meet

Post by derf »

Nikkormat wrote:And Roy, I think I'll take an alternator off your hands!
Hit me up when you get there and it's yours.
User avatar

jsinajeep
Posts: 1850
Joined: Tue Aug 23, 2011 8:25 pm
Location: Brownsburg Indiana

Re: 2017 swap meet

Post by jsinajeep »

I am planning on bring some manuals and other parts.
User avatar

SparkyB
Posts: 133
Joined: Thu Jan 23, 2014 5:42 pm
Location: SW Colorado

Re: 2017 swap meet

Post by SparkyB »

I have the mirrors from my 88 wag and the taillights from a 78 Cherokee I could bring. I also still have a Smittybilt roll cage for a Cherokee. Not sure if I could fit that in though.

Sent from my SM-S920L using Tapatalk

Charles Kline
Posts: 717
Joined: Thu Aug 06, 2015 8:00 am
Location: Golden, Co

Re: 2017 swap meet

Post by Charles Kline »

I have a TON of stuff I need to clear out that I'm getting listed. I'm not going to Ouray this year but we could figure out a way to get it to you - either hitch a ride or drive by Golden on the way.
Prices are negotiable.

https://denver.craigslist.org/search/ss ... d=35689709
User avatar

Topic author
derf
Posts: 1403
Joined: Mon Jun 04, 2012 9:10 am
Location: Littleton, CO
Contact:

Re: 2017 swap meet

Post by derf »

Looking to pick up some 70's era manual seat brackets if anyone has a set.
W0JPR

Check out my gear ratio calculator

If you can't fix it with a hammer or duct tape you have an electrical problem.
User avatar

shimniok
Moderator
Posts: 772
Joined: Sat Jun 09, 2012 8:40 am
Location: Centennial, CO

Re: 2017 swap meet

Post by shimniok »

will e wrote:Make me an offer, I am anxious to get most of this gone. Some of it I am posting local too so it may be gone.
...
Used spare shafts for wide track. Came out of an 82 so D40 DD up front and amc 20 in the back.
New alloy wide track shafts for AMC 20
I might want those alloy shafts or possibly the stock ones). How much we talking?

Sent from my XT1096 using Tapatalk
Broken Photobucket image in my post? PM me.
'86 GW "Troubled Child" tc.wagoneer.org
360, TBI, 4" Skyjacker, 33" BFG MTs, WT D44+ARB, WT AMC20 + LockRight, CB 2m 6m 70cm, K0FSJ
The world's first Robotic Full Size Jeep!
Post Reply