Interior Tire Carrier,Grab Handles and Mirrors

User avatar
jsinajeep
Posts: 1687
Joined: Tue Aug 23, 2011 8:25 pm
Location: Globe AZ.

Re: Interior Tire Carrier,Grab Handles and Mirrors

Postby jsinajeep » Fri Oct 23, 2015 6:29 pm

I can not find the LIKE button

User avatar
rstep
Moderator
Posts: 1108
Joined: Sun Dec 18, 2011 5:52 am
Location: Tucson,Desert
Contact:

Re: Interior Tire Carrier,Grab Handles and Mirrors

Postby rstep » Wed Jun 08, 2016 6:25 am

Just updating ,yes still building all this stuff.
The Grab handles have dropped in price and start at $41 a set now.
Also changed the design some so now they mount on the A pillar only no messing with the headliner.
1977 Cherokee
401 ,turbo 400 P/T,Rear detriot
Tad Rack
Custom Interior
Front and rear bumpers custom
Black spokes 33's MT's

Stuff I Make.
viewtopic.php?f=34&t=5620

User avatar
will e
Posts: 2929
Joined: Sat Aug 18, 2012 8:21 am

Re: Interior Tire Carrier,Grab Handles and Mirrors

Postby will e » Wed Jun 08, 2016 10:50 am

Hey! Do you have pictures of the new handle design?

Are you all still thinking about doing aluminum roof racks?
81 Wagoneer - 'WILL E' Retired

82 Cherokee WT - SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau Moab Seats/RCI 6point Harness/Hella Aux lights/tuffy console/killer32 sliders/custom bumpers and roll bar/WARN 8000/steering brace/CO2 Tank/CB/dual batts/custom TC skid plate

User avatar
rstep
Moderator
Posts: 1108
Joined: Sun Dec 18, 2011 5:52 am
Location: Tucson,Desert
Contact:

Re: Interior Tire Carrier,Grab Handles and Mirrors

Postby rstep » Wed Jun 08, 2016 2:28 pm

Here are a few pictures of the grabs. They can be mounted high or low on the A pillar.
1977 Cherokee
401 ,turbo 400 P/T,Rear detriot
Tad Rack
Custom Interior
Front and rear bumpers custom
Black spokes 33's MT's

Stuff I Make.
viewtopic.php?f=34&t=5620

User avatar
will e
Posts: 2929
Joined: Sat Aug 18, 2012 8:21 am

Re: Interior Tire Carrier,Grab Handles and Mirrors

Postby will e » Wed Jun 08, 2016 6:33 pm

Those look good! I'll PM yeah about getting a set.
81 Wagoneer - 'WILL E' Retired

82 Cherokee WT - SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau Moab Seats/RCI 6point Harness/Hella Aux lights/tuffy console/killer32 sliders/custom bumpers and roll bar/WARN 8000/steering brace/CO2 Tank/CB/dual batts/custom TC skid plate

User avatar
surfwagoneer
Posts: 579
Joined: Fri Oct 05, 2012 6:09 am
Location: Wilmington, NC

Re: Interior Tire Carrier,Grab Handles and Mirrors

Postby surfwagoneer » Fri Jul 01, 2016 7:20 am

PM sent for a pair of mirror mounts
89 GW- Rebuilt 360 w RV camshaft, 4 inch Rustys spring lift, 1" body lift, dana 44HD front, 14 bolt rear 3.73's.
78 Cherokee Chief- work in progress

User avatar
rstep
Moderator
Posts: 1108
Joined: Sun Dec 18, 2011 5:52 am
Location: Tucson,Desert
Contact:

Re: Interior Tire Carrier,Grab Handles and Mirrors

Postby rstep » Fri Jul 01, 2016 8:40 am

pm didn't go threw.
1977 Cherokee
401 ,turbo 400 P/T,Rear detriot
Tad Rack
Custom Interior
Front and rear bumpers custom
Black spokes 33's MT's

Stuff I Make.
viewtopic.php?f=34&t=5620

User avatar
Dr. Marneaus
Posts: 1539
Joined: Fri Oct 05, 2012 10:04 am
Location: Reno, NV

Re: Interior Tire Carrier,Grab Handles and Mirrors

Postby Dr. Marneaus » Fri Jul 01, 2016 9:55 pm

How the heck did I miss this!? The tire carrier is brilliant.

Is there any sort of plate or anything that mounts under the floor to support the weight?

I'm super interested in one.
Well it ain't just the smoke and the traffic jam that makes me the bitter fool I am But this four-wheel buggy is A-dollaring me to death.
For gas and oils and fluids and grease, And wires and tires and anti freeze....And them accessories, Well honey, that's something else.

User avatar
Gumby
Posts: 1414
Joined: Sun Jan 29, 2012 10:20 am
Location: Tucson, AZ

Re: Interior Tire Carrier,Grab Handles and Mirrors

Postby Gumby » Sat Jul 02, 2016 5:07 am

No need on the floor but there is for the upper mount.
1984 GW 360/727/208.... 4"/ 31"
2004 CRD QC SRW 3500 4X4 (DD)
1983 "project Dubya" (long term)

User avatar
surfwagoneer
Posts: 579
Joined: Fri Oct 05, 2012 6:09 am
Location: Wilmington, NC

Re: Interior Tire Carrier,Grab Handles and Mirrors

Postby surfwagoneer » Sat Jul 02, 2016 5:58 am

Rstep. Do you still make the original corner mount grab handles? A buddy of fine would like a pair for his j truck
89 GW- Rebuilt 360 w RV camshaft, 4 inch Rustys spring lift, 1" body lift, dana 44HD front, 14 bolt rear 3.73's.
78 Cherokee Chief- work in progress

User avatar
rstep
Moderator
Posts: 1108
Joined: Sun Dec 18, 2011 5:52 am
Location: Tucson,Desert
Contact:

Re: Interior Tire Carrier,Grab Handles and Mirrors

Postby rstep » Sat Jul 02, 2016 6:06 am

Yes I do ,Surf .
1977 Cherokee
401 ,turbo 400 P/T,Rear detriot
Tad Rack
Custom Interior
Front and rear bumpers custom
Black spokes 33's MT's

Stuff I Make.
viewtopic.php?f=34&t=5620

User avatar
surfwagoneer
Posts: 579
Joined: Fri Oct 05, 2012 6:09 am
Location: Wilmington, NC

Re: Interior Tire Carrier,Grab Handles and Mirrors

Postby surfwagoneer » Sat Jul 02, 2016 7:52 am

I'll shoot you a paypal payment today some time for mirror mounts and a pair of grab handles then
89 GW- Rebuilt 360 w RV camshaft, 4 inch Rustys spring lift, 1" body lift, dana 44HD front, 14 bolt rear 3.73's.
78 Cherokee Chief- work in progress

candymancan
Posts: 1275
Joined: Tue Mar 22, 2016 11:32 pm

Re: Interior Tire Carrier,Grab Handles and Mirrors

Postby candymancan » Sat Jul 02, 2016 11:05 pm

Question on the grabbers.. Ive been worried drilling into the pillars and starting rust because once you drill you do remove some of the paint... am i worrying over nothing ?


As for the tie carrier inside.. I have been thinking of fabbing my own until i saw yours.. I have two ZJ's and i like how the spares are mounted inside.. I dont like my spare tires being exposed to the elements it wears out the rims.. tires and rubber ect... MY 5.9 zj's full size spare is from 1998 and it looks brand spanking new.. because its been inside the Jeep and covered by leather... Not exposed to the elements.
2013 SS camaro, cammed, and modded too much to say 500 RWHP 30k
1998 Jeep Grand Cherokee 5.9L Limited 181k
1998 Jeep Grand Cherokee 4.0 I6 laredo 240k
1990 Jeep Grand Wagoneer 116k

User avatar
rstep
Moderator
Posts: 1108
Joined: Sun Dec 18, 2011 5:52 am
Location: Tucson,Desert
Contact:

Re: Interior Tire Carrier,Grab Handles and Mirrors

Postby rstep » Sun Jul 03, 2016 6:04 am

Candyman,There is always a chance rust could get in there. If you put a bit of paint in the holes it would be less. I wouldn't worry about it.
1977 Cherokee
401 ,turbo 400 P/T,Rear detriot
Tad Rack
Custom Interior
Front and rear bumpers custom
Black spokes 33's MT's

Stuff I Make.
viewtopic.php?f=34&t=5620

User avatar
Dr. Marneaus
Posts: 1539
Joined: Fri Oct 05, 2012 10:04 am
Location: Reno, NV

Re: Interior Tire Carrier,Grab Handles and Mirrors

Postby Dr. Marneaus » Tue Jul 05, 2016 8:46 am

the pics of folks with 31's in the back look pretty dern tight. Wondering if I can fit a 33 back there without major interference. Perhaps i'll have to stand it up and test fit
Well it ain't just the smoke and the traffic jam that makes me the bitter fool I am But this four-wheel buggy is A-dollaring me to death.
For gas and oils and fluids and grease, And wires and tires and anti freeze....And them accessories, Well honey, that's something else.

User avatar
rstep
Moderator
Posts: 1108
Joined: Sun Dec 18, 2011 5:52 am
Location: Tucson,Desert
Contact:

Re: Interior Tire Carrier,Grab Handles and Mirrors

Postby rstep » Tue Jul 05, 2016 9:12 am

Andrew , the first page has pictures of a 33 in my 69 Waggy
1977 Cherokee
401 ,turbo 400 P/T,Rear detriot
Tad Rack
Custom Interior
Front and rear bumpers custom
Black spokes 33's MT's

Stuff I Make.
viewtopic.php?f=34&t=5620

Grey Goose
Posts: 2
Joined: Tue Jul 05, 2016 6:06 pm

Re: Interior Tire Carrier,Grab Handles and Mirrors

Postby Grey Goose » Wed Jul 06, 2016 8:18 pm

Could you send me some pics of bumpers that you have fabricated ?

User avatar
MtnYJ
Posts: 150
Joined: Sun Jun 10, 2012 8:12 pm
Location: Asheville, NC

Re: Interior Tire Carrier,Grab Handles and Mirrors

Postby MtnYJ » Sun Jul 24, 2016 2:03 pm

Got our mirrors mounted, they're probably the sturdiest part of the truck now!

Image

Image

Image
Tim & Sarah

'84 CJ-7, AMC 401
'76 J20, T-18, Dana 20, no floors
'91 Grand Wagoneer, AMC 360, AX-15, NP208, manual hubs
'93 YJ, 4.0L, 5-SP, flipped Dana 300, Dana 44s
'14 Ram 3500 4x4 CTD
Carolina Full Size Jeep Club President http://www.cfsjc.com

User avatar
j10jim
Posts: 230
Joined: Wed Jul 25, 2012 12:05 am
Location: Simi Valley, CA

Re: Interior Tire Carrier,Grab Handles and Mirrors

Postby j10jim » Wed Aug 10, 2016 9:49 pm

Hey! I recognize those mounts! Bob made the 1st set for me. Now I just need to get the doors back together so I can mount mine. Did you use nutserts or just bolt through the metal?

MtnYJ wrote:Got our mirrors mounted, they're probably the sturdiest part of the truck now!

Image

Image

Image
1980 J10/20
Rusty's 4" lift, 2" body lift, old Cliffhanger front bumper, 35" tires, 65 dash w Speedhut gauges

LONG time member of ifsja.org, FSJ-List and some others...

User avatar
j10jim
Posts: 230
Joined: Wed Jul 25, 2012 12:05 am
Location: Simi Valley, CA

Re: Interior Tire Carrier,Grab Handles and Mirrors

Postby j10jim » Wed Aug 10, 2016 9:53 pm

Here are my mounts:
ImageImage
1980 J10/20
Rusty's 4" lift, 2" body lift, old Cliffhanger front bumper, 35" tires, 65 dash w Speedhut gauges

LONG time member of ifsja.org, FSJ-List and some others...


Return to “Vendors”

Who is online

Users browsing this forum: No registered users and 1 guest