After 38 years of the California summers my poor Cherokee Chief needs new side/quarter window seals.
Does anyone have a source they have used for these seals and if so, how well did they work?
Were they installed by a pro or did you put them in yourself? If you did the job, how much hassle was it?
Thanks ahead of time for your replies.
Jim
Quarter window seals source?
-
Tatsadasayago
Topic author - Posts: 3684
- Joined: Thu Aug 28, 2014 2:22 pm
- Location: Sacramento, CA
Quarter window seals source?
1977 Cherokee Chief - The Blair Jeep Project III
A collection of parts flying in close formation
A collection of parts flying in close formation
-
SJTD
- Posts: 1933
- Joined: Tue May 21, 2013 12:02 pm
- Location: Lompoc, Sunland or somewhere between
Re: Quarter window seals source?
TGW has em.
Sic friatur crustulum
'84 GW with Nissan SD33T, early Chev NV4500, 300, narrowed Ford reverse 44, narrowed Ford 60, SOA/reversed shackle in fornt, lowered mount/flipped shackle in rear.
'84 GW with Nissan SD33T, early Chev NV4500, 300, narrowed Ford reverse 44, narrowed Ford 60, SOA/reversed shackle in fornt, lowered mount/flipped shackle in rear.
-
XJChad
- Posts: 315
- Joined: Sat Sep 28, 2013 11:58 pm
- Location: Dewey, Ok
Re: Quarter window seals source?
Yep, I bought some from TGW I havent put them in yet.
1989 Grand Wagoneer, 4" Rusty's Lift, LS 5.3L swap (in progress), 4L60e, NP241c.
1991 Grand Wagoneer, all stock, a work in progress, for sale soon.
1982 Cherokee Laredo, 360ci, aluminum intake, Edelbrock carb, HEI, w/32x11.50x15, warn 8000, Dana 44/AMC 20
2001 Cherokee Sport, Old Man Emu lift (worn out), front/rear C4x4 bumpers, Smittybuilt 10,000 winch, 31x10.50x15, Edge Tuner kit w/throttle body & AFE cold air, Gibson exhaust-my daily driver until the '89 is finished.
1991 Grand Wagoneer, all stock, a work in progress, for sale soon.
1982 Cherokee Laredo, 360ci, aluminum intake, Edelbrock carb, HEI, w/32x11.50x15, warn 8000, Dana 44/AMC 20
2001 Cherokee Sport, Old Man Emu lift (worn out), front/rear C4x4 bumpers, Smittybuilt 10,000 winch, 31x10.50x15, Edge Tuner kit w/throttle body & AFE cold air, Gibson exhaust-my daily driver until the '89 is finished.
-
letank
- Posts: 4030
- Joined: Wed Oct 03, 2012 9:16 pm
- Location: SF bay area
Re: Quarter window seals source?
Quarter? As in cargo!
2 people are needed... the right rope, the 1/4 yellow is a but too rough for an easy glide. I used one if the cheapo harbor freight plastic tool to help extrude the lip.I slipped the glass from either side, and think that starting with the pointy end is easier even as it seems harder.
I reused mine as my fix was rust repair
2 people are needed... the right rope, the 1/4 yellow is a but too rough for an easy glide. I used one if the cheapo harbor freight plastic tool to help extrude the lip.I slipped the glass from either side, and think that starting with the pointy end is easier even as it seems harder.
I reused mine as my fix was rust repair
Michel
74 wag (349 Kmiles... parked, next step is a rust free body)
85 Gwag (229 Kmiles... the running test lab)
74 wag (349 Kmiles... parked, next step is a rust free body)
85 Gwag (229 Kmiles... the running test lab)
-
Tatsadasayago
Topic author - Posts: 3684
- Joined: Thu Aug 28, 2014 2:22 pm
- Location: Sacramento, CA
Re: Quarter window seals source?
Thanks! I'll check out TGW.
1977 Cherokee Chief - The Blair Jeep Project III
A collection of parts flying in close formation
A collection of parts flying in close formation
-
XJChad
- Posts: 315
- Joined: Sat Sep 28, 2013 11:58 pm
- Location: Dewey, Ok
Re: Quarter window seals source?
Actually, I think the quarter window seals I ordered were for my 89 GW, not my 82 Cherokee, iirc. I'll have to check them.
1989 Grand Wagoneer, 4" Rusty's Lift, LS 5.3L swap (in progress), 4L60e, NP241c.
1991 Grand Wagoneer, all stock, a work in progress, for sale soon.
1982 Cherokee Laredo, 360ci, aluminum intake, Edelbrock carb, HEI, w/32x11.50x15, warn 8000, Dana 44/AMC 20
2001 Cherokee Sport, Old Man Emu lift (worn out), front/rear C4x4 bumpers, Smittybuilt 10,000 winch, 31x10.50x15, Edge Tuner kit w/throttle body & AFE cold air, Gibson exhaust-my daily driver until the '89 is finished.
1991 Grand Wagoneer, all stock, a work in progress, for sale soon.
1982 Cherokee Laredo, 360ci, aluminum intake, Edelbrock carb, HEI, w/32x11.50x15, warn 8000, Dana 44/AMC 20
2001 Cherokee Sport, Old Man Emu lift (worn out), front/rear C4x4 bumpers, Smittybuilt 10,000 winch, 31x10.50x15, Edge Tuner kit w/throttle body & AFE cold air, Gibson exhaust-my daily driver until the '89 is finished.
-
SJTD
- Posts: 1933
- Joined: Tue May 21, 2013 12:02 pm
- Location: Lompoc, Sunland or somewhere between
Re: Quarter window seals source?
Oops. I was thinking Wagoneer also.
Sic friatur crustulum
'84 GW with Nissan SD33T, early Chev NV4500, 300, narrowed Ford reverse 44, narrowed Ford 60, SOA/reversed shackle in fornt, lowered mount/flipped shackle in rear.
'84 GW with Nissan SD33T, early Chev NV4500, 300, narrowed Ford reverse 44, narrowed Ford 60, SOA/reversed shackle in fornt, lowered mount/flipped shackle in rear.
-
letank
- Posts: 4030
- Joined: Wed Oct 03, 2012 9:16 pm
- Location: SF bay area
Re: Quarter window seals source?
before I forget, I used seam sealer in most of the corner sections.
After those El nino mini storms, it is dry in the cargo area.
After those El nino mini storms, it is dry in the cargo area.
Michel
74 wag (349 Kmiles... parked, next step is a rust free body)
85 Gwag (229 Kmiles... the running test lab)
74 wag (349 Kmiles... parked, next step is a rust free body)
85 Gwag (229 Kmiles... the running test lab)