Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Area for post regarding Jeeps other than an FSJ. This area may contain technical post regarding those vehicles as well.
Topic author
cherokee79
Posts: 6 Joined: Sun Apr 08, 2012 11:28 am
Location: michigan
Post
by cherokee79 » Tue Jun 03, 2014 6:25 pm
What is the simplest way to replace a internal slave cylinder in a yj?
jaber
Vendor
Posts: 3066 Joined: Sat Aug 27, 2011 5:24 pm
Location: Chino Valley, Az.
Post
by jaber » Tue Jun 03, 2014 9:09 pm
Do the clutch while its out...
AwesomeJ10
Posts: 3031 Joined: Sat Aug 27, 2011 10:26 am
Location: Off the grid on Storm Mountain Colorado
Contact:
Post
by AwesomeJ10 » Tue Jun 03, 2014 10:14 pm
remove the entire assembly and replace with another bellhousing that allows for an external slave cylinder. the TJ's have the same tranny, but with the better, external slave.
rocklaurence
Vendor
Posts: 2569 Joined: Sat Mar 30, 2013 6:53 am
Post
by rocklaurence » Wed Jun 04, 2014 5:18 am
Its just like any other. Support the engine, pull the Tcase, then shifter, and tranny. Replace the clutch and slave--re install.
Topic author
cherokee79
Posts: 6 Joined: Sun Apr 08, 2012 11:28 am
Location: michigan
Post
by cherokee79 » Wed Jun 04, 2014 5:50 am
ok i was just seening what everybody though, thank you