Hey guys, just re hosted my pics, and will be making a parts list on the first page.
I love being on forums like this so we can all share what we are building and knowledge that we have gained. so one of the problems i was finding is my nv4500/np241 uses and electronic speedo and obviously my jeep is cable. so after much frustrating research, I began to put together how to fix this issue.. enter my first in depth tech tip for you guys, this info is great for anyone swapping a 241 into a mechanical speedo truck
OR vice versa.
Parts you need for a mechanical conversion on a chevy np241: (Luckily i had 2 useful transfer cases laying around.)
early dodge tail housing (mine came from my 94 cummins 12v that I swapped a manual in)
A mechanical speedo gear insert, mine came from my 86 wagoneer stock np208.
Dodge set up
IMG_8672.HEIC by
nate irving, on Flickr
IMG_8673.HEIC by
nate irving, on Flickr
8 bolts and two snap rings later, you cane remove the blue gear from the donor t case
IMG_8679.HEIC by
nate irving, on Flickr