Today I did a ton of wiring on the scout. I'm using a cheap Amazon ignition panel, since it looks cool, is cheap, and has a bunch of accesory switches on it so it'll be easier to wire lights and winches when I get to that point.
Once I was done wiring I hooked the dead scout battery to the live battery in my f150, since the scout battery is a completely toasted Walmart battery from 2009.
When I flipped the ignition switch (which activates the start button and accesory switches) everything activated like it was supposed to. But when I pushed the start button I could hear the starter relay clicking, but the starter wouldn't spin. Also the relay would only click once, not repeatedly like a dead battery normally does.
Wiring info
The first switch is wired to a distribution block which then feeds everything else.
The distribution block is wired to the coil positive terminal, the start button, and the accesory switches.
The Start button is wired to the starter relay, and then the starter.
Any one have any suggestions.
Sent from my SM-N960U using Tapatalk