Page 1 of 1

SKYJACKER 4 inch

Posted: Sat Oct 13, 2018 6:02 am
by fsj454
Springs are flat. So I have a set of used 1979 j20 front springs that I am having reconditioned by a spring shop . couet spring shop been in business for 180 years . I have a 1982 Cherokee with homemade front winch bumper with a warn 12000 winch .duel batterys . and a high lift jack on bumper must be 500 extra pound on front spring SOA. So I am making my own custom front spring from used oem parts with new spring bushings and center bolts , These skyjacker springs are 2 years old and gave a hard ride so I do not recommend buying this brand ... :fsj:

Re: SKYJACKER 4 inch

Posted: Sat Oct 13, 2018 11:05 am
by Stuka
I am a bit confused. Do you currently have stock flat springs, and are switching to J20 springs, or do you currently have Skyjacker springs?

Skyjacker is considered to have the best riding springs of any lift springs out there. Which shocks did you use? And were the spring eyes left loose until the vehicles weight was on them?

Re: SKYJACKER 4 inch

Posted: Sat Oct 13, 2018 4:49 pm
by fsj454
I have skyjacker springs in the jeep now that are flat. Shocks are rancho rs 9000. SOA Dana 60

Re: SKYJACKER 4 inch

Posted: Thu Oct 18, 2018 1:13 am
by fsj454
Used and abused 1979 j20 front spring arch is 7 3/4 .Have new spring bushings . Will be adding a extra leaf with a good custom arch under main leaf and hope I have the 10 inches of lift with SOA . Have TT flip kit in rear