Finally got around to building some brackets for the camper, welded up these 1/4" brackets with removable ends for the front anchor points. Rears are next.
No pictures but I also cleaned up the fan wiring after the volvo 2 speed relay crapped out and replaced it with two individual relays. While testing if they would work the AC experienced rapid depressurization, IE blew out the compressor seal and dumped the refrigerant
. The fans never came on with the AC so my guess is that the lack of airflow caused it to over pressurized and blow the seal. The fans work according to cooling temp though
.
Also decided to get a tune loaded to my spare PCM as I've been disappointed with the current tune. The current tune seems to run rich, randomly idles high and I've notice poor gas mileage. Well so far no luck with the new tune, got the computer back and loaded in the truck and it idles at 400RPM. Immediately dies in gear. So working on that now, if anyone has any suggestions on what that might be I'm all ears. I need to follow up with the tuner again but they confirmed the idle is set to 800RPM. Jeep ownership - always something hahaha