Full Size Jeep Network

COjeeper wrote: ↑Sun Jan 07, 2024 2:24 pm I’m looking for an 87 heater box, any of those laying around?

dljlobos wrote: ↑Fri Sep 01, 2023 6:30 pm Hello, I apologize for not responding earlier to this. I don't know how I missed your message before now but I'm trying to catch up and hopefully still find some axles. Do you happen to still have those 82 axles? If so, do you also have any suggestions on how I could get them to Arizona for a reasonable cost?

Thanks and sorry again for the delayed response.

threepiece wrote: ↑Fri Apr 21, 2023 8:49 am

dljlobos wrote: ↑Tue Apr 18, 2023 1:26 pm Hello, Do you have any 1980 or newer J10 axles available? I'm looking for the front with the driver side drop Dana 44, and the rear centered AMC 20. Thanks

I have been loading axles onto my truck headed to the scrap yard. The 1982 J10 axles happen to be on top of the pile. The front has the vacuum disconnect apparatus. Both axles for $80. You can have the control unit on the dashboard too.

Rumbone wrote: ↑Sun Oct 29, 2023 12:52 pm Looking for a windshield for a 1977 J10
Can you help and ship?

candymancan wrote: ↑Fri Sep 08, 2023 8:04 pm Threepeice..Do you have J series truck tail gate arms. The two arms for the tailgates. The guy wjo i bougjt my J10 from took the tailgate off before i arrived.. and took them off.. and forgot to give them to me.

So now i need them. Since my bed is nearly done being rebuilt

argonaut wrote: ↑Wed Aug 02, 2023 10:19 pm I could use an air cleaner, in nice condition. Not sure how they changed over the years but I'd like one with less holes and less vacuum actuators, as I have converted to fuel injection. But I need the rectangular intake tube so i can connect to the stock fresh air hose in my 1980 wagoneer.

Parsonsf wrote: ↑Sun Nov 05, 2023 8:20 pm Could definitely use some pieces. Got anything left?

78 blu ox wrote: ↑Tue Nov 14, 2023 11:31 am Do you have a dipstick for a turbo 400?

Snow fighter wrote: ↑Sat Nov 18, 2023 11:05 am I am currently looking for a complete cab with doors.

Trident wrote: ↑Fri Jan 05, 2024 9:32 pm I read in an old post that you had tooling to make fender flares. Are you still making them? If not, what are your plans for the tooling?

argonaut wrote: ↑Tue Feb 13, 2024 1:48 pm This is very specific, but I need one of the chrome shoulder bolts that attaches the upper armrest to the bottom middle seat. One of mine stripped out when trying to dismantle my center seat for re-upholstery.

Otherwise I guess I might be looking for another whole center seat/arm rest...

89WoodyBlues wrote: ↑Sat Jan 20, 2024 8:41 pm I'm looking for wood grain trim for all four 1989 GW doors.

fjs0001 wrote: ↑Tue Apr 09, 2024 3:04 pm I need a passenger side door latch. I need the round older style. I think they switch to the crow feet style in 1980. Do you have one?