Upper Woodpecker on Saturday January 4th

FSJ Related Events in the Mountain Time Zone

Topic author
will e
Posts: 5103
Joined: Sat Aug 18, 2012 8:21 am

Re: Upper Woodpecker on Saturday January 4th

Post by will e »

No problem Jeff. I will most likely bring tortillas, cheese and salsa in case the opportunity presents itself. Usually but the time I get the grill going most people are half way done with their lunch and by the time I get done it can be an hour or so.

My wife is going to bring a separate car to the flag pole. We have a time limit on being gone so if anyone runs into a more major issue I will need help to get her back to the flag pole.
81 Waggy 'WILL E' Retired
82 Cherokee WT - SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau XRS Baja & 5 point retractable harness/Hella Aux lights/tuffy console/killer32 sliders/Evil Twin bumpers, rack and roll cage/WARN 8000/TT Fabworks steering brace/dual batts/custom TC skid plate/ARB fridge

78 Arizona Chief
Posts: 250
Joined: Thu Nov 14, 2013 7:27 pm
Location: Gilbert, AZ

Re: Upper Woodpecker on Saturday January 4th

Post by 78 Arizona Chief »

Y'all have fun and be safe. Wave at me as I will be at McD's at 7:30 a.m. with my father-in-laws club.
Cheers!
Kevin
1978 Cherokee Chief: Parents bought new. 360/TH400/NOS Quadratrac, 44's/ARB's/4.10's, SOA, Shackle Flip, Alcan Springs, FOX 2.0's, 35" BFG KM2s, custom bumpers, 324,000 miles and counting...
User avatar

Tad
Vendor
Posts: 2267
Joined: Fri May 13, 2011 4:08 am
Location: Southern AZ
Contact:

Re: Upper Woodpecker on Saturday January 4th

Post by Tad »

78 Arizona Chief wrote:Y'all have fun and be safe. Wave at me as I will be at McD's at 7:30 a.m. with my father-in-laws club.
Cheers!
Kevin
You folks have a great ride Kevin, I'd like to explore the Casa Grande area someday but I'm sure your fathers group is bored with it.

Em may bail as her sister is in town, rules change when family is involved so I may or may not have an open seat.
Will not know until 5am, that's how Em rolls.
A collection of 1966 to 1986 parts.
Self Inflicted Flesh Wound
Caddy425/TH400/Atlas 4spd/14B/D60/locked front and rear/Hydroassist/39.5 Irocks
(Join date = Friday the 13th)

My Stuff:
http://www.ttsfabworks.com/
Tech Stuff:
IFSJA WMS Project

Locked and Loaded
Posts: 478
Joined: Wed Oct 03, 2012 7:57 pm

Re: Upper Woodpecker on Saturday January 4th

Post by Locked and Loaded »

Shauna won't be going this trip. My brother will fill her seat.
Drink more Water

Topic author
will e
Posts: 5103
Joined: Sat Aug 18, 2012 8:21 am

Re: Upper Woodpecker on Saturday January 4th

Post by will e »

I am still in. The wife will be showing up a little after me.

Kevin, if you can, post up what CB channel you guys are on. I will take a listen every once in a while. We will be on channel 7. I have my cell and your number.
81 Waggy 'WILL E' Retired
82 Cherokee WT - SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau XRS Baja & 5 point retractable harness/Hella Aux lights/tuffy console/killer32 sliders/Evil Twin bumpers, rack and roll cage/WARN 8000/TT Fabworks steering brace/dual batts/custom TC skid plate/ARB fridge
User avatar

rstep
Moderator
Posts: 1238
Joined: Sun Dec 18, 2011 5:52 am
Location: Tucson,Desert
Contact:

Re: Upper Woodpecker on Saturday January 4th

Post by rstep »

Picking up Martin at 515 then Tads by 600 then out to Florence for breakfast and meet Jerry. The Cherokee is full for the ride...
1977 Cherokee Sold
I Don't own One
Stuff I Make.
http://fsjnetwork.com/forum/viewtopic.php?f=34&t=5620

Locked and Loaded
Posts: 478
Joined: Wed Oct 03, 2012 7:57 pm

Re: Upper Woodpecker on Saturday January 4th

Post by Locked and Loaded »

I'm up. Eating breakfast. Then finish loading the CJ. Leave house by 6. Pick up brother in Apache Junction. Trying to be at flagpole by 7:45.
Drink more Water

Locked and Loaded
Posts: 478
Joined: Wed Oct 03, 2012 7:57 pm

Re: Upper Woodpecker on Saturday January 4th

Post by Locked and Loaded »

Heading out. :D
Drink more Water
User avatar

TUDrewser
Posts: 1306
Joined: Mon Aug 12, 2013 9:40 pm
Location: Mesa, AZ

Re: Upper Woodpecker on Saturday January 4th

Post by TUDrewser »

I so wish I was with you guys :(

Sent from Tapatalk
1990 GW "saved by Jerry" edition
will e wrote:I guess life is better if you are not moving too fast.

Locked and Loaded
Posts: 478
Joined: Wed Oct 03, 2012 7:57 pm

Re: Upper Woodpecker on Saturday January 4th

Post by Locked and Loaded »

Had an amazing day wheeling with everyone. Thanks Mike for setting this up. Thanks to Jerry and Martin for the spots.Only thing that broke was my baby Jeep.

Image

Image

Image

Image

Image

Image
Drink more Water
User avatar

Stuka
Site Admin
Posts: 11812
Joined: Thu May 12, 2011 5:53 pm
Location: CA
Contact:

Re: Upper Woodpecker on Saturday January 4th

Post by Stuka »

Cool photos!
2017 JKU Rubicon
Pevious Jeeps: 1981 J10, 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ

Topic author
will e
Posts: 5103
Joined: Sat Aug 18, 2012 8:21 am

Re: Upper Woodpecker on Saturday January 4th

Post by will e »

I had a great day out wheel'n with you guys. Christine took some photos, I will try to get them posted up.

Drew, you might want to hold off on this one until you get some sliders. I will let the other guys chime in on their thoughts.

Jeff, be honest. The baby jeep didn't break down, you bent a rim. And anytime you fix something on the trail with nothing more than a hammer and muscle its not a break down, it is a 'trail side modification'.
81 Waggy 'WILL E' Retired
82 Cherokee WT - SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau XRS Baja & 5 point retractable harness/Hella Aux lights/tuffy console/killer32 sliders/Evil Twin bumpers, rack and roll cage/WARN 8000/TT Fabworks steering brace/dual batts/custom TC skid plate/ARB fridge
User avatar

rstep
Moderator
Posts: 1238
Joined: Sun Dec 18, 2011 5:52 am
Location: Tucson,Desert
Contact:

Re: Upper Woodpecker on Saturday January 4th

Post by rstep »

Great day on the trail, thank you Mike for setting the run up. It was great to see Christine again.
Drew you missed a good one . Rock sides with 4 inch lift a must. Even SOAed I had to watch carefully so I will have rock slides soon.
Jeff I thought you were seeing what brand trail compressors every one had and who had the best hammer...
Image
Tad making it look easy.
Image
It was only flat on the bottom.
Image
Air down
Image
Jeff and Tom
Image
Image
Image
Image


Arizona Alien
Image
1977 Cherokee Sold
I Don't own One
Stuff I Make.
http://fsjnetwork.com/forum/viewtopic.php?f=34&t=5620
User avatar

rstep
Moderator
Posts: 1238
Joined: Sun Dec 18, 2011 5:52 am
Location: Tucson,Desert
Contact:

Re: Upper Woodpecker on Saturday January 4th

Post by rstep »

A Great picture.
Image
1977 Cherokee Sold
I Don't own One
Stuff I Make.
http://fsjnetwork.com/forum/viewtopic.php?f=34&t=5620
User avatar

Tad
Vendor
Posts: 2267
Joined: Fri May 13, 2011 4:08 am
Location: Southern AZ
Contact:

Re: Upper Woodpecker on Saturday January 4th

Post by Tad »

It was a great trip.
Perfect weather and perfect timing.

Your CJ did great Jeff.
I will get my video up when I get to my computer.

Drew, I agree with Mike.
Some type of rocker/body protection is pretty much mandatory for most of that trail.
Also some diff protection, I have several new scars on my front 60 cage and a new tweak in the frame.

I also think Jeff and Mike running AT's have a lot less tire chunks missing compared to Bob and I with our MT's.
A collection of 1966 to 1986 parts.
Self Inflicted Flesh Wound
Caddy425/TH400/Atlas 4spd/14B/D60/locked front and rear/Hydroassist/39.5 Irocks
(Join date = Friday the 13th)

My Stuff:
http://www.ttsfabworks.com/
Tech Stuff:
IFSJA WMS Project
User avatar

fulsizjeep
Moderator
Posts: 5012
Joined: Sun Nov 06, 2011 7:21 am
Location: Fruitville, FL
Contact:

Re: Upper Woodpecker on Saturday January 4th

Post by fulsizjeep »

Looks like a very nice time was had. Great pictures, thanks for sharing! :-bd :fsj:
Flint Boardman
88 GW, 401/727/208, 5" lift, D44s/4.10s/locked up, 35s
https://jubileejeeps.org/quadratrac
User avatar

jsinajeep
Posts: 1850
Joined: Tue Aug 23, 2011 8:25 pm
Location: Brownsburg Indiana

Re: Upper Woodpecker on Saturday January 4th

Post by jsinajeep »

The only down side for me was my Chero was down and didn't get go. But the good side is I rode
with Tad and did not worry about anything. Jeff anytime you can fix a problem with a BFH it
not a real trail break down and it was nice to meet your brother. I know Drew you will read this
and yes it sucks not being there. I had and real good time with you guys.

Topic author
will e
Posts: 5103
Joined: Sat Aug 18, 2012 8:21 am

Re: Upper Woodpecker on Saturday January 4th

Post by will e »

fulsizjeep wrote:Looks like a very nice time was had. Great pictures, thanks for sharing! :-bd :fsj:
Kind of funny seeing the AZ guys together in, of all places, Arizona! We are going to try to keep the momentum going.
81 Waggy 'WILL E' Retired
82 Cherokee WT - SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau XRS Baja & 5 point retractable harness/Hella Aux lights/tuffy console/killer32 sliders/Evil Twin bumpers, rack and roll cage/WARN 8000/TT Fabworks steering brace/dual batts/custom TC skid plate/ARB fridge
User avatar

Tad
Vendor
Posts: 2267
Joined: Fri May 13, 2011 4:08 am
Location: Southern AZ
Contact:

Re: Upper Woodpecker on Saturday January 4th

Post by Tad »

Ok, here are the videos I got:

rstep
http://www.ttsfabworks.com/video/upwood ... 3/Bob1.MOV

rstep
http://www.ttsfabworks.com/video/upwood ... 3/Bob2.MOV

Locked and Loaded
http://www.ttsfabworks.com/video/upwood ... /Jeff1.MOV

will e
http://www.ttsfabworks.com/video/upwood ... /Mike1.MOV

will e
http://www.ttsfabworks.com/video/upwood ... /Mike2.MOV

Four more from Gumby's POV.

will e
http://www.ttsfabworks.com/video/upwood ... /Mike3.mov

rstep
http://www.ttsfabworks.com/video/upwood ... 3/Bob3.mov

Locked and Loaded
http://www.ttsfabworks.com/video/upwood ... /Jeff3.mov

Me
http://www.ttsfabworks.com/video/upwood ... 3/Tad1.mov
will e wrote:
fulsizjeep wrote:Looks like a very nice time was had. Great pictures, thanks for sharing! :-bd :fsj:
Kind of funny seeing the AZ guys together in, of all places, Arizona! We are going to try to keep the momentum going.
It is sort of ironic that most of the pic's with a lot of AZ FSJ folks are all taken in Ouray.
We need to fix that.
A collection of 1966 to 1986 parts.
Self Inflicted Flesh Wound
Caddy425/TH400/Atlas 4spd/14B/D60/locked front and rear/Hydroassist/39.5 Irocks
(Join date = Friday the 13th)

My Stuff:
http://www.ttsfabworks.com/
Tech Stuff:
IFSJA WMS Project
User avatar

Gumby
Posts: 1433
Joined: Sun Jan 29, 2012 10:20 am
Location: Tucson, AZ

Re: Upper Woodpecker on Saturday January 4th

Post by Gumby »

I have been trying to get my videos loaded to "PB" but not been able to, I will keep trying though...

Image

Image

On the top for a breather.
Image

Assessing the gap.
Image

One Bad little jeep.
Image

My ride leaving me
Image

I really had fun on this trip and I will be making some progress in order to get mine back and ready for this type of trail soon.. I mean VERY soon. Breakfast was so good I had peanuts for lunch :D . Also forgot to mention that cool "billy goat" with the goatee.
1984 GW 360/727/208.... 4"/ 31"
2004 CRD QC SRW 3500 4X4 (DD)
1983 "project Dubya" (long term)
Post Reply