Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
So going slow steep uphill especially from a stop the tires jump and bark. Reverse is worse. Been told motor or trans mount. Sound like the problem?...
Last post
Well this is embarrassing it seems I didn't know how to correctly drive my truck yet, so used to my dd baby Jeep TJ for the last 13 years. After...
Hey guys I'm in the middle of a refurbish process and I found this...Its on the back of the instrument cluster. My question is, Can I fix it. It's a...
Last post
Answer - yes. I have fixed such broken pins by putting a piece of solid wire inside the pin, with it sticking out 1/8 or so, and soldering it in....
Does anybody on here have solid, reliable information on casting numbers, combustion chamber size, etc. of factory AMC V8 heads, particularly the...
Last post
Suppose I could just check the casting number on the '89 heads. The chart doesn't indicate a change '79-'84 so hopefully they used the same number on...
Ok, the history,rebuilt engine in about '03, TBI'd after breakin. We are roughly 100K on it now and had some power issues. Pulled the intake off and...
Last post
The valve is working fine, and that lifter laying there is not the one in question. Thats the intake lifter that popped out after the push rod broke....
I have searched and can find nothing that describes how to replace the Multi Function Switch itself. One post showed simply pulling the switch out of...
Last post
It's been too many years ago to trust my memory 100% so....
My 78 Cherokee has the Ford style mirrors installed and I don't have any existing holes to indicate different mirrors. I scanned some Jeep brochures...
Last post
This is what mine came with. I believe these are the West Coast mirrors that were offered.
Tried searching for my answer and am coming up short. I have a 3 port charcoal canister and a 2100 with bowl vent. Currently the vent is not running...
Last post
tgreese, as always, very helpful and thank you. That makes perfect sense. I only have the single TAC which takes up hot air at startup. Does that...
Does anyone have pictures of a Jeep J-10 with some 32 inch tires? I am looking at getting some 235/85/16's and would like to know what it might look...
The bushings in the gears of my tailgate window motor are gone, I cant find anywhere that even has the gear with the motor much less by itself hoping...
Last post
The fords looked small to me but I was expecting something that filled the hole more which it probably doesn't need. I think i like the ball bearing...
I need some help mounting my front brake hoses to the frame. It's been 2 years since I took my truck apart and lost the front brake hose mount on the...
Last post
Thanks for the info.
I went to the hardware store and bought 5/8 x 18 jam nuts.
My plan now is to buy make a bracket out of 1/8 flat stock. Drill...
I would like to fill the holes (Pie Plate Area) behind my 1977 J-10 Grill with Lights. Is there a drop in light and housing that will work and match...
Last post
The grill will reflect back a lot of the light. Unless someone previously drilled holes, nothing truly matches but it's not too hard to mod.
The heater fan in my J-10 works but turns off after using it for a while on high. Is there some kind of thermal disconnect built into the switch? It...
Last post
Wow thanks for all the info. I will take a look tomorrow and see what I can find.
What is the purpose of the thermal switch? What is it protecting....
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
