Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
On a stock 360, if the stock mechanical fuel pump is suspected of not working, can an electric pump be installed near the tank and push fuel thru the...
Last post
I can get 150 miles out of a full tank in my J-20, then I start looking for a station. I also carry a 5 gal jerry can full, just in case my blond...
Been working with my son on his 75 2 door Cherokee. Verified today that the stock fuel pump was not working. Replaced it and ran a line to a gas can,...
So, my radio hasn't worked since I bought the Waggy and I finally got around to pulling the dash apart. I replaced the inline fuse (15A that seems to...
Last post
OOHH. I had no idea that there was another plug. So it's in the engine bay side of the firewall, below the brake booster? I'll check for that. Thanks...
I have been having a sporadic issue where I'll go to start the truck, turn the key and have no power anywhere. No lights, no no radio, nothing....
Last post
Yeah be sure to save that picture for the IT never happens crowd. Sound like time for the volt meter conversion. Be happy all of you wirng is not in...
Any Florida pan handle or lower Alabama FSJers? Need a good 360 guy to come and take a listen to my sons 75 Cherokee. When we try to start the Jeep,...
Hey guys, i am fairley new to the fsj scene, i recently bought a 64 jeep gladiator. I have no clue what the interior is supposed to lookike, but mine...
Anybody know of a source for this? Or if there is a better name to search for? Haven't had any luck finding one for the heater, only finding stuff...
Last post
Let me know if you need the fuse for this unit. I have a source they do exist. 59 cents each. They are easily repairable. it's a simple thermal fuse...
I have a 1990 GW with the 360/727/NP229 drivetrain. Stock drivetrain from the factory. I have been working through some issues trying to get the 4wd...
Last post
That's why reverse unwinds it. I think it's not fully out of low when that happens. Possibly a bent fork or worn pads allowing too much slop between...
I'm in the process of getting my J10 running and in the process of switching out the carb with a motorcraft 2100....
Before I head out to junk yard I...
Last post
I wouldn't worry with the bent nipple. The broken one you may be able to fix by cutting up a plastic vacuum tee and gluing it on with some epoxy or...
I finally found an FSJ the wife approved of - 1978 4-door Cherokee Chief with a 401. It's a bit of a rust bucket (as so many I've looked at...
Last post
Letank has some great points all around. Maybe you'll get lucky and you don't need a rebuild. The common assumption is that a typical AMC v8 needs a...
I have a 74 wagoneer with discs in front. I was at a pick a part and got a driver side rotor/hub from a 78 cherokee. I recently swapped them over and...
Last post
First I would like to thank everyone for their input ad help. It was in fact the spindle sie that was the problem. The 78 has a larger spindle...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum