Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Buying a 73 j4000. Has wiring issues. Swapped with a 350sbc. None of the lights work. Po said sometimes they will work out of the blue but most time...
On my 85 Grand Wagoneer, it seems there is a strange repair perhaps done by a previous owner. One of the red wires from the ignition coil is cut and...
Last post
Wire nuts aren't ideal for cars, and absolutely fix it right and don't use them if you can help it, however they'll get the job done if you need them...
So I’ve been using Valvoline 10-30 conventional in my 87 GW 360 since I bought it 5 years ago and now am unable to find it. What kind of oil are you...
Last post
Why not Use Rotella dino 10-30 diesel oil. It has the higher levels of zinc, and maintains the same viscosity you have been using. I would not...
In typical 1 thing leads to 10, I noticed the feed wire coming off the alternator was run close to the manifold, and is getting crispy. Looking...
Last post
When I upgraded to Cs140 on my 83 I ran a big fat wire from the alternator to the battery. I didn't bypass the original wiring. My amp meter doesn't...
My '86 J20 did not have any running lights.
I determined that the Headlight switch must be the issue, so I decided to replace it.
It had been highly...
Last post
Thats interesting.. i noticed your intrument cluster dials arent faded at all.. Very bright orange there. First ive seen that
Can someone verify that if you push the defrost switch down it cancels the timer. In other words it shuts the defroster off.
The schematic is...
Last post
Thanks guys and thanks for that info runover. Who'd have thunk there's a diode in it from the diagram. Usually when there's electrickery in a switch...
Having trouble finding all the parts I need. Looking at BJ's, TGW, and Rock Auto. There is some difference in terminology and that may be part of the...
Last post
Rocklaurence any mods needed to run your 1 ton stuff?
Nope, its been confirmed to fit OEM and lifted FSJs. However, if your running a 5-6 lift...
Just picked up a 90 GW. Most everything is there and from what i can tell stock. Bought it not running but would turn over. Replaced some essentials...
Last post
Coolant doesnt last forever older stuff was only good for 3-5 years after that it loses its ability to stop corrosion completetly. Its possible it...
I have a 1977 Wag it has an Hei dist factory voltage regulator.I just noticed starter solenoid Red wire with white trace wire is no hooked up ,but it...
Last post
Sorry about that on the Grand ,You are not nit picking just giving knowledge
So I’ve been using Valvoline 10-30 conventional in my 87 GW 360 since I bought it 5 years ago and now am unable to find it. What kind of oil are you...
Last post
I use Valvoline VR1. It has a high zinc content. I order it via Amazon.
So i got my Jeep back together.. again.. found out my ticking/tapping in another tjread i made was 3-4 exhaust leaks on the drivers side manifold....
Last post
Ya i saw those. But they honestly dont look like mine. My 4 center 3.8th bolts arent hollow like those. Those 4 also say they are for the air pipes ?...
In 1978 did AMC offer different leaf spring options for the 2 Door Cherokee?
My spring packs are heavy duty and I'm wondering if they are aftermarket...
Last post
Springs were based on GVWR.
In general, 2 leaf up front is the HD pack (stiffest), 4 (five if you count the tiny one on the bottom) is the middle....
Anyone done ball joints recently? I am trying to find a non knurled greasable lower ball joint that isn't junk. The Dana/Spicer one is non knurled...
Last post
Used some from rockauto for a chevy i narrowed, but had to take knuckle off to change zirq for low profile cuz theones that came with interfere with...
Hello all! In an effort to make real the saying of shaking off the rust, I have bought my first Jeep in over ten years, and it is a thoroughly rusty...
Last post
As tgreese said, if you don't have a vented cap on it and aren't running the recovery system, that's a problem. When I put the '79 tank and filler in...
Never had this prior to me doing the rear main seal. All i did was valve covers. Oil pan and oil fill tube i painted them and thats it minus the rear...
Last post
I'de remove PS belt, and listen for it, then when cold see if your fingers can tell leak air pressure OR if you can barrow a BOROSCOPE and look for...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
