Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
I have a foreign made SUV that uses the Jeep Transfer Case NP 229. The vacuum motor is probably not working. Can anyone advise me how I can tell if...
Last post
Wanna get even more confused? The case in my Jeep now is the NP242. It is a part time AND full time case, offering 2wd, Locked 4wd HI, full time 4wd...
How far do the rocker arms move on a 360/401? I replaced my intake manifold and went 2bbl the other day and while the valve covers were off I noticed...
Last post
They make clip o. Plugs to prevent oil.splash, ive got a set i use to use on old school chevy 350's, and u are right if u have cam wear that bad u...
Hello everyone, I have a '74 wagoneer. I was able to source a pair of new rear springs for my wagoneer. Unfortunately, I believe they're later model...
Last post
The springs will get longer once they have weight on them. The 54 isn't a valid length.
Also, those posts are really pretty tough to get off. They...
As I prepare to get my Jeep ready for some basic trail duty, I've started to play with the transfer case a little bit. Shifting from 2wd...
Last post
I've got a question not directly involving a Jeep product but another foreign made SUV that has a NP 229 Transfer Case called a Laforza. The transfer...
My old timing cover is leaking at the plug on top of the oil pump housing, so I bought a new kit from Bulltear. Also going to install a DUI...
Last post
Update/recap for future reference:
The job itself is not difficult, but it is time consuming if done correctly. I installed the Bulltear timing cover...
I'm setting up gears in a D44 from a 90 GW, and would like some more experienced opinions.
Here is where I'm at. Backlash is at .009:
Sent from...
Last post
Yours looks good. I learned that the most important part of the pattern is that the pinion doesn't run into the root or off the Topland. It can leave...
I have been perplexed on the location of a leak on my wagoneer. I thought it could have been the clogged air vents - tried to clear...
Last post
amc had funky antenna cable wire swaged to a body plug and my plug was as hard as a rock and shrunk to be leaking when it rains , not much in az tho,...
I have an '86 Grand Wagoneer and while working on restoring the interior the wiring attached to the electronic mirror adjustment switch came loose. I...
Last post
Hi guys,
after a few tries I've now found the correct color assignment for this switch.
This works for my 83' Woody
I replaced the door weather strips on my J-20 now the doors do not close. There is a large gap to the rear of the cab panel. I don't understand since...
Last post
You can make the aftermarket generic weatherstrip work. BTDT. You'll need to adjust the door striker, and use more force when you close the doors....
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum