Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Anyone out there running an atlas behind the TF727? I have some questions about some things for. Tried to do a search and couldn’t come up with much.
Last post
I plan on adding a Black Box reduction case to my FSJ. It is significantly cheaper, 2.72:1, plus the 2nd/OEM case 2.72:1 that allows 1:1/2.72:1/554:1...
I doubt im the first to try this but i cant find anything so far. I may be crazy but i was wondering if i can put in a 205 from a dodge. I know they...
I'm looking at transfer case mounted E-brake kits for my NP205 and am wondering if anyone had any experience with either High Angle Driveline's kit...
Last post
I have a dodge HD NP 205 In my 1982 Cherokee that has a factory drum brake on the T case . The Dodge hd tcase has 32 spline front and rear outputs ....
So I have been working on an '89 Grand Wagoneer that will be just a weekend play vehicle both on road and off road/beach. I put an inexpensive 3...
Last post
I have an 89 - same 3 rough country lift - I have 32x11.5's on them - looks good - no cut aways - rubs when you turn the wheel the last bit of to the...
This is my truck. Pics a few years old (thanks Photobucket and a dead laptop) so, it has a few more dents and no doors, now. I kinda know what I want...
Last post
Dropped the truck and tubing off yesterday. Crzyxj as he's known in the offroad race world has free rein to get the cage, sliders, and seats in/on it...
Lame title, I know... just clean it right? Here’s the thing, it’s more than just that it’s dirty. I have a body lift on my Wagoneer, and I think the...
Last post
Hmm that may be some of the problem. The fan was not shrouded. The new E-fan should help with that.
Can anyone help with what leaf springs I might have? The Jeep is a fullsize 1980 Cherokee and I ordered a Rough country 3 lift. Complete lift all new...
Last post
74 is in the back only. i just replaced them without going to Hell Creek. They were very kind but wanted over $2K for a full set. I just can not...
Is there a reason why guys aren’t using the 246 transfer case when doing an LS swap? It looks like a lot of guys are using the 241c passenger drop.
Last post
Thank you guys for the responses. I think it will simplify things to use the 241. I am also using the 6 lug rear axle off the donor vehicle so I will...
I was just surfing around for ideas as we let the holiday meal settle. I was wondering if anyone has built or tried making Stanchions for a rollcage...
Last post
Pictures would be appreciated!
I am 6' tall, so I have a little room to play with.
I am torn between just doing a hoop out over the front...
I want to start by mentioning I did use the search bar haha. I am looking for my options to either double the transfer case or a bolt in option using...
Last post
Yeah, I see that now. After a bit of reading there are some differences, mostly because the JL has the FAD unit and the t-case has some changes to...
I’ve heard of people doing this type of swap and thought it sounded like a good idea.
I’m looking for first-hand experience on what is involved with...
Last post
Hi jay-ten . I have done all of the above,. Where is your location because I have all the parts rims .axles .shafts. .From a 1979 j20 3.73 ratio...
1981 Jeep j10, 360/t176/ np208 factory setup. The trans need rebuilt or replaced and I was curious about what stronger transmission would bolt up w/o...
I'm planning to go to 5.13 gears in my J10 with a TH400, QT, and 35.5 Q78 TSL's. Besides a max cruising speed of 55mph (until I swap to an ax15) what...
Last post
I run 4.56's with 37's and my TF727. It works fine on the roads. Instead of going with a OD tranny and steeper gears I spent the money on a 4 speed...
I keep bending/breaking RS 44044 springs on the front of my honcho (tons and 42's SOA).
So I'm thinking about running some stock GM front springs...
Last post
Blake, any more thoughts on this. What did you end up with and were ya happy with your decision. I’m contemplating the same thing, I have a 81 j10 I...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
