Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Okay, decided if I'm gonna have the j20 all the way down to the frame and engine anyways it's gonna be worth it in the long run. The flatbed won't...
Last post
200 ft lbs torque @2400 rpm so the AX-15 conversion for XJs would work. Get one for pre '90 and it has a .70 O/D (.75 after that) That will give you...
Well, a great friend of mine who is into not-so-big jeeps (yj owner) finally steered me in the right direction. We help each other out with our jeeps...
Last post
I measured my dads srw f350 out back and where the cab mounts to the frame is within an inch. To get around the size of the motor I'm going to most...
OK, I hate to start this thread because I'm sure that there will be delays and I hate it when persons talk a Big Game but never follow through (like...
Last post
Silly question, but you did make sure it's not a reverse rotation engine?
this is my j200 tray back that I found in a paddock an got for $600
what i'm doing is fitting a landcruiser engine gearbox an axles to it
the engine...
Last post
the jeep is at a bit of a stand still at the moment I moved 5 hours away from it an don't have the space for it just yet
but has anyone done...
What would one expect to pay to get diesel conversion done, a 4bt or 6bt swap, in a Grand Wagoneer? I have read these posts and marvel at the great...
Last post
I found your post on CL, let me know if you end up doing this yourself, I also live in WNY, but sorry, I have my hands full with my own project. Have...
I've noticed alot of 6.9 idi ford motors going for less than half what most 6.2's are going for in my area. I have experience with the idi and COULD...
Last post
It's the torque rating that's worrisome. 300lbs of motor plus filters and batteries
So as far as my long term build plans go I plan on replacing my 360 with a mildly built 4bt. I have been reading up a lot on 4btswaps.com and...
Last post
Thanks for the advice guys. Lots to think about but a lot of time to do it in. Unfortunately it going to be a while before I get a 4bt but no better...
So I've decided I'm going to run a mildly built Isuzu 4bd1t in my j20 backed by an nv4500. I like the d20 because it doesn't hang below the frame but...
Last post
I think that is a good choice. It won't hang too low with a little clocking care. That's what I'm doing with my 4BD1-T but it's behind a 47RH.
As I have my Isuzu 4BD1 in hand and am closing in on a rig for my build I need to finish locating parts. I am looking for options for a front mounted...
Last post
I would get one from a first gen dodge Cummins (pre 93), I posted some info in ross80trucks link above.
Excuse the long-winded intro. I need to give credit where it’s due. If you want to get to the meat and potato’s jump to the next post. I waited until...
Last post
I locked this post as the full build thread is available here:
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum