Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
My heater is stuck on high. Do fsj’s have heater core resistors? Is my board just fried? Where should I start?
Last post
i would start with the heater resistor on the engine bay side of the heater core plentum next to the blower motor thats where i would start, 2 screws...
I'm trying to research the S10 Blazer fuel tank swap. The tank in my '72 Wagoneer is pretty beat up, has a shady looking patch, and I get occasional...
Hey all,
I'm hoping someone may be able to point me in the right direction.
I'm looking for a replacement floor mount for the accelerator pedal of my...
Last post
First post! Welcome from Boston.
You can search the forum with your favorite search engine.
This thread (picked from the above search) covers...
I have a 71 Wagoneer 360, Dana 30 front with closed knuckle, stock Dana 44 rear, 3.73 gears. I may have access to axles from an 89 with the gearing I...
Last post
With a V8 I wouldn't bother with the D20 overdrive. It's too weak to handle the torque; even if the hp is within the range, torque is the real killer...
This was posted to Hemmings.com yesterday and thought you all would enjoy it. Some of it was new to me. I knew that AMC used the Pontiac and Porsche...
Last post
Yep, I joke the other day that I now need to 401's. One for the Wagoneer and one for my International 1210 which currently has a SV304. Of course, if...
I have a 4350 motorcraft carburetor in my 1975 jeep j10. I’ve had some problems with it idling bad, now that’s fixed but now it’s pouring out gas. I...
Last post
Yes I know what re manufacturing means I meant “brand new” as in its hasn’t been used after it’s been re manufactured lol. It would be super rare to...
Was the 4-wheel drive badge that was located under the J2000 badge, mounted on bothe the driver and passenger side behind the front wheel? Or just on...
Last post
I've got some extra badges like that off a '72 if you want two of them. Both would ideally need restored but aren't too bad.
About to get off to a sierra trip... drive down the street for gas... press the brake pedal... sinks a bit lower with a pop... emergency brake lights...
Last post
I used my hot air soldering iron... choice of various nozzle sizes... 300C, then 400C... not too sure if it did anything, the real solution was to...
I just got my (sign posts) which are u channle identical to truck bed supports basically. And i have my bedfloor from a dodge d250. Obviously i know...
Last post
Still gonna take the pics ? I at least needs pics of the corner parts to see how they welded the floor supports to the corner body panels
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
