Step bumper end cap

Stock FSJ Tech Area
Post Reply
User avatar

Topic author
Phils67
Posts: 1011
Joined: Sat Mar 24, 2018 3:11 pm

Step bumper end cap

Post by Phils67 »

Finally! I finally have a rear bumper (type2) and I'm super excited about this BUT now I have to source end caps for it. Are there any reproduction sources out there or alternatives that fit and don't look too out of place?
Last edited by Phils67 on Sun Jul 28, 2019 5:21 am, edited 1 time in total.
1967 Gladiator J2000, 1998 4.0L OBD2, T18, D20 twin sticks, D44HD/D60, Detroit lockers, 3.73s, 4wheel disc brake, FSSR, Dakota digital, etc.

BCRAWLER
Posts: 405
Joined: Fri Mar 29, 2013 10:11 pm
Location: Vancouver Island,BC

Re: Step bumper end cap

Post by BCRAWLER »

https://parts.hilltopchryslerjeepdodge. ... 63171.html

That came from a post " Jeep J10 end caps" presently on page 7.
1980 Cherokee,360/727/208, propane powered,unknown lift,31' Adventuro's on Chevy rims,Warn winch
1980 J10,360/standard/208, stepside
1970 GMC 4X4 Pickup, 78 frame, 84 350, Turbo 350/205, patina galore
1986 Blazer K5, 350/205/465 trans
1990 Cherokee XJ, about to scrap for FSJ parts, gone to parts graveyard in sky
User avatar

Topic author
Phils67
Posts: 1011
Joined: Sat Mar 24, 2018 3:11 pm

Re: Step bumper end cap

Post by Phils67 »

I saw that one, been on the fence about clicking the buy button since their parts dept is closed today and my local jeep dealer told me they are nationally discontinued. Wouldn't mind finding a chrome alternative if something out there would fit and not look out of place. I am calling them monday though. If they have them still I am buying them, providing I don't get impatient and do it online prior to monday
1967 Gladiator J2000, 1998 4.0L OBD2, T18, D20 twin sticks, D44HD/D60, Detroit lockers, 3.73s, 4wheel disc brake, FSSR, Dakota digital, etc.
User avatar

Topic author
Phils67
Posts: 1011
Joined: Sat Mar 24, 2018 3:11 pm

Re: Step bumper end cap

Post by Phils67 »

I still can't understand why one side is $25 and the other is $15. Its literally the same thing just reversed
1967 Gladiator J2000, 1998 4.0L OBD2, T18, D20 twin sticks, D44HD/D60, Detroit lockers, 3.73s, 4wheel disc brake, FSSR, Dakota digital, etc.

posulli88
Posts: 18
Joined: Thu Dec 15, 2016 7:49 pm

Re: Step bumper end cap

Post by posulli88 »

Did they have the parts in stock?
User avatar

Topic author
Phils67
Posts: 1011
Joined: Sat Mar 24, 2018 3:11 pm

Re: Step bumper end cap

Post by Phils67 »

I never got the chance to call. I have been so busy the last few days more than I'd like to be.
1967 Gladiator J2000, 1998 4.0L OBD2, T18, D20 twin sticks, D44HD/D60, Detroit lockers, 3.73s, 4wheel disc brake, FSSR, Dakota digital, etc.
User avatar

FLeetFox
Posts: 243
Joined: Tue Apr 17, 2018 7:05 am
Location: Blue Ridge Mtns

Re: Step bumper end cap

Post by FLeetFox »

I hate to be that guy... there is no way those pieces are still around. If they are truly available, I would offer to buy out the stock they have. I have visited that site looking for sport side parts in the past. I placed an order for a filler neck cover, they cancelled it stating "out of stock." Please, prove me wrong and our community will benefit.

Fleet Fox
I do things my way, and I pay a high price.... JCM
User avatar

Topic author
Phils67
Posts: 1011
Joined: Sat Mar 24, 2018 3:11 pm

Re: Step bumper end cap

Post by Phils67 »

I may call today if I get a chance. Someone needs to reproduce these.
1967 Gladiator J2000, 1998 4.0L OBD2, T18, D20 twin sticks, D44HD/D60, Detroit lockers, 3.73s, 4wheel disc brake, FSSR, Dakota digital, etc.
User avatar

Topic author
Phils67
Posts: 1011
Joined: Sat Mar 24, 2018 3:11 pm

Re: Step bumper end cap

Post by Phils67 »

No good. Website is wrong the guy on the phone said and none are shown anywhere nationally.
So...the million dollar question, has anyone found suitable alternatives for these caps?
1967 Gladiator J2000, 1998 4.0L OBD2, T18, D20 twin sticks, D44HD/D60, Detroit lockers, 3.73s, 4wheel disc brake, FSSR, Dakota digital, etc.
User avatar

FLeetFox
Posts: 243
Joined: Tue Apr 17, 2018 7:05 am
Location: Blue Ridge Mtns

Re: Step bumper end cap

Post by FLeetFox »

I believe Giobizio (sp) on the mother ship had a pair made from a pattern for his Italy Honcho build a few years back. Perhaps look there?

Fleet Fox
I do things my way, and I pay a high price.... JCM
User avatar

2ToneBluJ10
Posts: 17
Joined: Wed Feb 27, 2013 11:16 am
Location: Williamsport, PA

Re: Step bumper end cap

Post by 2ToneBluJ10 »

I 3d printed a couple sets of type II 4 3/4" tall bumper end caps that I modeled based off my set of originals that I bought 20 some years ago.
They bolt on and fit like the originals.

https://photos.app.goo.gl/4KZdUcP6BcaA1ZQWA

https://photos.app.goo.gl/b1Lk8tbLvqdPdhG97

https://photos.app.goo.gl/b1Lk8tbLvqdPdhG97

Prototype test fit

https://photos.app.goo.gl/HKJXxN5Q8uc8MsDU9
'83 J10 258 tf999 np208 2.73s
It was used like a truck for its first ten years of existence...it now lives a sheltered life.

sirrus
Vendor
Posts: 717
Joined: Fri Sep 13, 2019 11:13 pm
Location: Hillsboro, OR

Re: Step bumper end cap

Post by sirrus »

Looks good! I was told that these end caps are unobtainanium and some people would like to buy printed ones, but I couldn’t model one without having dimensions or original part to measure.

What plastic did you use for them? ABS should hold up well and can be easily sanded (or filled and painted) to hide layer lines
Sometimes we reinvent the wheel not to have more wheels but to have more inventors

1988 Grand Wagoneer - AMC 360 with ProFlo4 MPFI, TF727, NP229 FOR SALE
2021 JLU Willys EcoDiesel - new shiny toy
User avatar

2ToneBluJ10
Posts: 17
Joined: Wed Feb 27, 2013 11:16 am
Location: Williamsport, PA

Re: Step bumper end cap

Post by 2ToneBluJ10 »

I printed them in PETG. I would like to become a vendor of these as I lost my job of 25 years and my medical costs are expensive.

ABS gives off toxic fumes during printing and I don't want to breath those fumes for the almost 3 days that it takes to print a set.

Originals:

https://photos.app.goo.gl/2EVdKkFFejmQ1S6C8

Right and left mounted on spare step bumper:

https://photos.app.goo.gl/mswrsUSMaaYj1pK78

These will also fit on CJ8s / Scramblers.
'83 J10 258 tf999 np208 2.73s
It was used like a truck for its first ten years of existence...it now lives a sheltered life.

sirrus
Vendor
Posts: 717
Joined: Fri Sep 13, 2019 11:13 pm
Location: Hillsboro, OR

Re: Step bumper end cap

Post by sirrus »

PETG is a good choice! I almost stopped using ABS in favor of it, too finicky to use without enclosed printer and as you’ve said it gives off fumes. Only benefits of ABS are lower price, ease of post processing and being able to glue it with acetone.

Sorry to hear about your job, I hope folks here would be interested in buying your caps. Good luck!
Sometimes we reinvent the wheel not to have more wheels but to have more inventors

1988 Grand Wagoneer - AMC 360 with ProFlo4 MPFI, TF727, NP229 FOR SALE
2021 JLU Willys EcoDiesel - new shiny toy
User avatar

2ToneBluJ10
Posts: 17
Joined: Wed Feb 27, 2013 11:16 am
Location: Williamsport, PA

Re: Step bumper end cap

Post by 2ToneBluJ10 »

I forgot to mention PETG can be painted with the use of adhesion promoter primer after sanding. ABS would look too glossy vapor polished but it would erase the layer lines but that's risky also.
'83 J10 258 tf999 np208 2.73s
It was used like a truck for its first ten years of existence...it now lives a sheltered life.

wylder
Posts: 11
Joined: Sun Nov 30, 2014 7:18 pm

Re: Step bumper end cap

Post by wylder »

You can buy a set of cast Aluminum end caps from Kim Dawson over on the CJ8.com site. Nice quality parts. The original end caps had different cutouts to fit either a CJ or J truck by reversing them side to side. You can see the difference in bumpers in my album. By the way Kim also does really nice restorations on the CJ grab handles and leather wrapped steering wheels. https://photos.app.goo.gl/G2Twj8mwzPVbgzvw5
User avatar

2ToneBluJ10
Posts: 17
Joined: Wed Feb 27, 2013 11:16 am
Location: Williamsport, PA

Re: Step bumper end cap

Post by 2ToneBluJ10 »

These printed caps fit all 4.75 inch tall Flex-N-Gate step bumpers produced for AMC Jeeps J trucks and CJ 8s.
'83 J10 258 tf999 np208 2.73s
It was used like a truck for its first ten years of existence...it now lives a sheltered life.

NAL5376
Posts: 5
Joined: Thu Aug 19, 2021 11:18 am

Re: Step bumper end cap

Post by NAL5376 »

Are you making and selling any of the bumper caps? Do you have a price and delivery time?
Probably going to be needing a pair this winter when I start body work on the truck.
Thanks.
User avatar

Topic author
Phils67
Posts: 1011
Joined: Sat Mar 24, 2018 3:11 pm

Re: Step bumper end cap

Post by Phils67 »

I'd buy a set of those 3d printed ones depending on the cost.
1967 Gladiator J2000, 1998 4.0L OBD2, T18, D20 twin sticks, D44HD/D60, Detroit lockers, 3.73s, 4wheel disc brake, FSSR, Dakota digital, etc.
Post Reply