![Image](http://uploads.tapatalk-cdn.com/20200607/cb85197b078cf5e45f4412194e9dd25a.jpg)
![Image](http://uploads.tapatalk-cdn.com/20200607/4225348d0e555871b37194c8e7eb48de.jpg)
Sent from my moto e5 cruise using Tapatalk
Yes please let me know as well. Mine is the same. I guess we could buy a locking one. It doesn’t matter which way it goes onmjdriver wrote:Hi guys I was wondering if someone could give me a part # or source of the correct gas cap for a 1973 J2000. I've tried buying one listed for the truck and it doesn't fit, the one on the truck fits but doesn't seem right, could be just worn out but I would like to be sure I order the correct one.
Sent from my moto e5 cruise using Tapatalk
It's 5000lb GVWR standard bed. The cap I bought is a omix 17726.13. when I do a search it seems like 73 is kind of a gray area, but I've found a crown J8123141 just would like to confirm it will fit, I would also prefer Stant if I can find one.tgreese wrote:You should know your GVWR. The GVWR is the 5th digit in your VIN: W, X Y oz Z for 5000, 6000, 7000 or 8000 resp. J2000 is not specific enough. Specifically which cap did you buy? Brand, number?
Thank you, I'll give that one a try. I don't have the evap system, tank is vented through a hose coiled up behind the panel for the filler neck with a 1/8" hole at the end. I don't think it would really matter if the cap is vented or not.tgreese wrote:Yeah, I thought that the GVWR was going to make a difference with the cap. Looking at the parts book, there are two numbers for a '73 J-truck cap with the Townside bed is either a 998957 or a 999933. Unfortunately both these numbers bring up a the same cap, but a different style from what you have. https://www.rockauto.com/en/partsearch/?partnum=998957 The 999933 should be a vented cap, and the 998957 non-vented - should be different, but the RockAuto listings say they are the same. Not surprising - the online listings are rife with errors.
The Jeep PN 8123141 is for a '74, not a '73.
Sorry, could not come up with anything else. You could look for a '74-79 filler neck, and that would fit the new cap you have. It is a non-vented cap, and expects a working vapor recovery system.
Not yet, the 998937 (Stant 10623) does not fit. Next I'm going to track down the type that the truck currently has it doesn't fit properly but it may just be worn out. I will report backKowpie wrote:Hello mjdriver
Were you able to source a proper fuel cap? I'm very interested as I have a '73 myself with a locking cap. I would like to find a standard cap.
Hmm... that's the same part number as the cap on my '79 CJ7. I'll have to check the fit tonight.
So I checked last night. The fuel cap off of my '79 CJ7 fits perfect on my '73 J4000. Mine is a 6000# rating. Checked my invoice from years ago and it is the same part #. Stant 10811.
Ok thanks guys, the Stant 10811 fits. Crown J8123141 fits aswell.