I need to know if anyone has the ability to measure some rear wagoneer springs. 79+, unloaded if possible. Looking for an eye-eye length and also a center pin-each eye length. Thanks for any help.
No, I don't have any rear springs.
Need some springs measured
-
j20owner
Topic author - Posts: 461
- Joined: Sat Aug 27, 2011 1:46 pm
Need some springs measured
Tatsadasayago wrote:And here i thought Capitalism was hitting the Shift Key...
-
Stuka
- Site Admin
- Posts: 11806
- Joined: Thu May 12, 2011 5:53 pm
- Location: CA
- Contact:
Need some springs measured
Technically 76+ rears from any FSJ will get you your answer 
I am out of town currently, so cannot help.
Sent from my iPhone using Tapatalk
I am out of town currently, so cannot help.Sent from my iPhone using Tapatalk
2017 JKU Rubicon
Pevious Jeeps: 1981 J10, 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ
Pevious Jeeps: 1981 J10, 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ
-
Snow Descent
- Posts: 10
- Joined: Tue Sep 11, 2012 7:23 pm
Re: Need some springs measured
Had to join the board as I happen to have this info sitting on my desk.
79 Wagoneer stock rear springs
Eye to eye 54"
Long side eye to center pin 29.5"
if I'm reading my notes correctly.
79 Wagoneer stock rear springs
Eye to eye 54"
Long side eye to center pin 29.5"
if I'm reading my notes correctly.
1979 Wagoneer, 360 V8, QT
-
j20owner
Topic author - Posts: 461
- Joined: Sat Aug 27, 2011 1:46 pm
Re: Need some springs measured
Welcome to the forum, Snow. I found a chart posted on the mother site that had a bunch of spring measurements. I've decided to run 3/4 ton chevy springs because I had them. I still need to get the new rear mounts I made attached to the frame.
Tatsadasayago wrote:And here i thought Capitalism was hitting the Shift Key...