Holley 4150 throttle linkage 360

FLeetFox · Post by **FLeetFox** » Mon Jan 20, 2020 8:07 pm

This may sound kind of dumb. Looking for a picture of your throttle linkage if your running a Holley 4150 style carb on a performer 2131 intake. I have the stock cable bracket and the stock cable installed, but something is not quite right. Looking for the easy button here from someone who already has done this please.

Fleet Fox

will e · Post by **will e** » Tue Jan 21, 2020 7:07 am

I could snap a pic of my truck avenger. It's a similar setup.

Is your 4150 a 'double pumper'?

FLeetFox · Post by **FLeetFox** » Tue Jan 21, 2020 9:16 am

Please do. it's actually a Barry Grant Demon, but basically a 4150 clone. did you use the stock bracket and cable Will E? or did you go to after market parts?

Fleet Fox

will e · Post by **will e** » Tue Jan 21, 2020 10:16 am

I will take a picture when I get home. If I remember correctly I used the stock setup but there is a piece you buy for the manifold.

FLeetFox · Post by **FLeetFox** » Tue Jan 21, 2020 10:22 am

Cool. I know summit and jegs sell a few different brackets, would like to know which one if that's what's needed. GM, FORD, Mopar, whichever.

Thanks again,

Fleet Fox

Full Size Jeep Network

Holley 4150 throttle linkage 360

Holley 4150 throttle linkage 360

Re: Holley 4150 throttle linkage 360

Re: Holley 4150 throttle linkage 360

Re: Holley 4150 throttle linkage 360

Re: Holley 4150 throttle linkage 360