Page 1 of 1

Question on Skyjacker 4inch lift kit

Posted: Wed Jul 01, 2020 3:28 pm
by megaman_plums
Hey guys,

I recently ordered the Skyjacker 4inch lift for my 77 Cherokee, and they only sent two leaf springs. They included everything else needed (drop pitman arm, shocks, eight u-bolts, steering stabilizer). The lift kit part number was #JP40KS-N.

The question I have is if they use different leaf springs front and rear on this kit? The only part number we can find is JP40FS.

Thanks in advance!


Sent from my iPhone using Tapatalk

Re: Question on Skyjacker 4inch lift kit

Posted: Wed Jul 01, 2020 4:00 pm
by Stuka
Yes, front to rear springs are VERY different. Sounds like they messed up on their order. Call them and have them fix it.

Re: Question on Skyjacker 4inch lift kit

Posted: Wed Jul 01, 2020 4:10 pm
by megaman_plums
Stuka wrote:Yes, front to rear springs are VERY different. Sounds like they messed up on their order. Call them and have them fix it.
On it. Thank you for that!

I’ve been playing phone tag. Looks like the full kit was ordered but Skyjacker seemed to not include the rear leafs.

Have to wait until tomorrow to find out what’s going on on Skyjackers side.


Sent from my iPhone using Tapatalk

Re: Question on Skyjacker 4inch lift kit

Posted: Thu Jul 02, 2020 4:45 am
by rocklaurence
Are you sure that you ordered the complete suspension system with rear springs? You can by the front springs with rear blocks--its way cheaper.

Re: Question on Skyjacker 4inch lift kit

Posted: Thu Jul 02, 2020 9:50 pm
by megaman_plums
The issue came down to something on Skyjackers side. Something about their computer system not adding in the rear springs. As you can see, it just shows 0 rear springs ordered.

But I’ve already talked to them and they have a set of rear sways that got shipped out today.

Image





Sent from my iPhone using Tapatalk