I am working on getting my Cherokee up and running and have no spark...
Background, I have never seen this rig run, but it turned over and ran momentarily when I bought it- the gas tank was not installed, but with a little gas in the carb it would run.
I have the Sniper all T'd up, fuel supplied by a RobbMC surge tank. I am getting fuel to the Sniper, I flushed the system and the Sniper smells like gas. Further, it still doesn't start with starter fluid, so I am pretty sure it's a spark issue.
I have replaced the ignition module, coil (measures 0.00 ohms post to post and 8.66 ohms on the 20K scale post to tower), new spark plugs and spark plug wires. Stock Ford distributor but a new cap and rotor. I think I have all the wiring sorted out, with the excpetion of a white wire coming from the voltage regulator (?) box (silver box that for me is next to the ignition module).
Tried the method to check spark by taking the plug out and grounding the body and watching for a spark. No spark.
Any ideas on how to troubleshoot? What am I missing here? I do have an Ebay HEI distributor, but I think I came to the conclusion that I can't use it with the Sniper system.