Page 1 of 1
Skyjacker 6" Lift for '89 GW- Need Images
Posted: Mon Apr 29, 2019 9:47 am
by MReno
Hello,
I am considering a Skyjacker lift for my GW. I am running 31x10.5 tires on stock rims. I am wondering if any fedter well trimming is needed if I installed a 6" SkyJacker lift kit? Also wondering what it would look like, so if you have any images, please reply with them. Thanks.
Re: Skyjacker 6" Lift for '89 GW- Need Images
Posted: Mon Apr 29, 2019 11:21 am
by RamJetFSJ
Well, first off, I don't think skyjacker makes a 6" lift for the GW. The only one listed is a 3.5-4" lift.
What size tires are you looking to run after the lift? And what kind/level of wheeling do you plan to do? That will dictate your fender trimming needs.
Re: Skyjacker 6" Lift for '89 GW- Need Images
Posted: Mon Apr 29, 2019 11:23 am
by RamJetFSJ
31x10.5 on the stock rims works great with a 4" lift, and will look and work right, with no fender trimming.
Re: Skyjacker 6" Lift for '89 GW- Need Images
Posted: Wed Feb 12, 2020 4:48 pm
by MReno
Decided on going minimal with a 3"RC lift with blocks in back. Running 31×10.5x15 tires.
https://photos.app.goo.gl/NdNRVLcvNpkSrq4g7
Re: Skyjacker 6" Lift for '89 GW- Need Images
Posted: Wed Feb 12, 2020 6:29 pm
by Stuka
You won't be happy with the ride quality of the RC lift, but it is cheap.
Re: Skyjacker 6" Lift for '89 GW- Need Images
Posted: Thu Feb 13, 2020 4:28 pm
by MReno
Its not a daily driver, just a play vehicle, so it will do.