Page 1 of 1

Atlas Suspension

Posted: Mon Dec 02, 2019 3:36 pm
by Mreuther12
Anyone running these springs? They had a post on IG for 30% all orders from now until Dec 7th thought they would be worth taking a look into. Would be interesting to know if they make springs/lifts for the earlier rigs. Site doesn't have too much information.

Image

Re: Atlas Suspension

Posted: Mon Dec 02, 2019 4:09 pm
by Stuka
Never heard of them. But being that they have their years entirely wrong, not sure I would choose them over a more experienced company.

Re: Atlas Suspension

Posted: Mon Dec 02, 2019 4:32 pm
by Mreuther12
Stuka wrote:
Mon Dec 02, 2019 4:09 pm
Never heard of them. But being that they have their years entirely wrong, not sure I would choose them over a more experienced company.
I was checking out their instagram and they did the springs on the KC Waggy at SEMA this year. That is what raised the question.

https://www.instagram.com/p/BzHhhhyp-x2 ... _copy_link

Re: Atlas Suspension

Posted: Mon Dec 02, 2019 4:54 pm
by Stuka
Mreuther12 wrote:
Mon Dec 02, 2019 4:32 pm
Stuka wrote:
Mon Dec 02, 2019 4:09 pm
Never heard of them. But being that they have their years entirely wrong, not sure I would choose them over a more experienced company.
I was checking out their instagram and they did the springs on the KC Waggy at SEMA this year. That is what raised the question.

https://www.instagram.com/p/BzHhhhyp-x2 ... _copy_link
I have no doubt they can build springs. But the springs on our vehicles changed multiple times, and were different between various models in the same years at some points. If you look at Hell Creeks ordering page, they ask year, model, bushing sizes, etc.

The Atlas springs most likely only fit 76-91 and not 63-75.

Re: Atlas Suspension

Posted: Mon Dec 02, 2019 8:04 pm
by Mreuther12
Stuka wrote: I have no doubt they can build springs. But the springs on our vehicles changed multiple times, and were different between various models in the same years at some points. If you look at Hell Creeks ordering page, they ask year, model, bushing sizes, etc.

The Atlas springs most likely only fit 76-91 and not 63-75.
I gave them a call. They would need the spring to match and re-engineer it. So yes they can do it, but it would be custom.



Sent from my iPhone using Tapatalk