Official non-factory bumper thread

[rstep]

Sorry no build thread on this bumper. Did it back before taking picture's was cool.

[SJTD]

How about some more pichers, from the top, side, etc?

[rstep]

Couple more of the front bumper getting cut for the winch.


After cutting the top off

With the plate welded in and the winch mounted.

[MtnYJ]

Hi-Lift attached and open



There's some good looking front bumpers in this thread!

[tndonor]

From my old J truck

My current 715

[Renodemona]

Stainless Brain Fabrications, through BJs.

It looks off in one picture as I had yet to tighten down the bolts. Guess I should finish first THEN admire my handiwork

[serehill]

Built not bought

[Stuka]

Somehow I missed this thread when it first was made.

Anyway, here is the front bumper from my old cherokee. Tad built it, and I miss it very much. But unfortunately it would not fit on my J10.

[jamesdart]

i really liked the way my truck looked with the stock 3 pc bumpers better. one day i might just make a reciver and shackle mounts that go through the stock bumpers and put them on. use a winch on a reciver mount.
front is an early 80s ford ramsey winch bumper. I had to remove the diamond plate on top to suck it in tight and make brackets to work, and it still needs some work to really fit the fsj. i will cut the diamond plate and put it back, it makes a nice step.

rear I built as an air tank, 4" pipe, 2 caps, a piece of tube for a reciver, some shackle mounts, and the tire swingout, and cb antenna mount. im going to make a slightly different swingout.

im torn on the whole thing. sometimes id like to clean my jeep up and just stick with a nice classic look, sort of like dr.marns. but most of the time id like to just keep going fabbing stuff and keep building it and using it as a beater/wheeler.

[Dirtfarmer]

http://www.fsjnetwork.com/forum/viewtop ... 843#p29843

[racerx12003r1]

Here's what i made from some scrap.

[44bz]

Warn classic winch bumper off a K5 Blazer


Sent from my iPhone using Tapatalk

[j20brett]

My bumper build thread.

http://www.ifsja.org/forums/vb/showthread.php?t=68406

and how it is now. Still going strong after nearly 7 years now

[hyampomj10]

rstep, you have a good looking setup there.


here's mine

[Grand_Wag_85]

This is the front bumper on my current '82


Rear

[ross80truck]

Here is the front bumper I built for my 76 Cherokee Chief.

[srobertsfsj]

I really like wnyjpgy's bumper on the "family crawler" the best. I would swap in a second.

[66stepside]

Here's one I built:





Here's one I picked up at the wrecking yard:

[Southern Gorilla]

Stainless Brain Fabrications, through BJs.

It looks off in one picture as I had yet to tighten down the bolts. Guess I should finish first THEN admire my handiwork

I really like that one. And the license plate would cover the logo so I wouldn't have to grind it off.

[wagoneer84]

These are what I run, home built