Hello all, just bought a 76 Cherokee and am looking forward to learning more about them. I have had CJs and YJs in the past but found a great deal on this and want to get it back into shape.
Cheers!
Gene
New to the forum and FSJs
-
Ramses659
Topic author - Posts: 3
- Joined: Thu Oct 17, 2019 9:25 pm
New to the forum and FSJs
You do not have the required permissions to view the files attached to this post.
-
will e
- Posts: 5103
- Joined: Sat Aug 18, 2012 8:21 am
Re: New to the forum and FSJs
Welcome from Phoenix! You've found a great spot for info, advice and encouragement. That's a good looking rig. What are your plans for it?
81 Waggy 'WILL E' Retired
82 Cherokee WT - SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau XRS Baja & 5 point retractable harness/Hella Aux lights/tuffy console/killer32 sliders/Evil Twin bumpers, rack and roll cage/WARN 8000/TT Fabworks steering brace/dual batts/custom TC skid plate/ARB fridge
82 Cherokee WT - SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau XRS Baja & 5 point retractable harness/Hella Aux lights/tuffy console/killer32 sliders/Evil Twin bumpers, rack and roll cage/WARN 8000/TT Fabworks steering brace/dual batts/custom TC skid plate/ARB fridge
-
fulsizjeep
- Moderator
- Posts: 5012
- Joined: Sun Nov 06, 2011 7:21 am
- Location: Fruitville, FL
- Contact:
Re: New to the forum and FSJs
Looking good so far! Welcome to the madness and good luck whipping it into shape.
Flint Boardman
88 GW, 401/727/208, 5" lift, D44s/4.10s/locked up, 35s
https://jubileejeeps.org/quadratrac
88 GW, 401/727/208, 5" lift, D44s/4.10s/locked up, 35s
https://jubileejeeps.org/quadratrac
-
Ramses659
Topic author - Posts: 3
- Joined: Thu Oct 17, 2019 9:25 pm
Re: New to the forum and FSJs
Thanks, just want to get it running for now. A few good things about it is the previous owner kept excellent records dating back to 1986, it has a 401, and a working Hickey sidewinder winch. The whole thing is bone stock and touches of rust but nothing major at all. Look forward to learning more about these trucks.
-
BCRAWLER
- Posts: 405
- Joined: Fri Mar 29, 2013 10:11 pm
- Location: Vancouver Island,BC
Re: New to the forum and FSJs
Just noticed the front visor. Do not be suprised if you get a bunch of requests for close ups. They are very few. Very cool.
1980 Cherokee,360/727/208, propane powered,unknown lift,31' Adventuro's on Chevy rims,Warn winch
1980 J10,360/standard/208, stepside
1970 GMC 4X4 Pickup, 78 frame, 84 350, Turbo 350/205, patina galore
1986 Blazer K5, 350/205/465 trans
1990 Cherokee XJ, about to scrap for FSJ parts, gone to parts graveyard in sky
1980 J10,360/standard/208, stepside
1970 GMC 4X4 Pickup, 78 frame, 84 350, Turbo 350/205, patina galore
1986 Blazer K5, 350/205/465 trans
1990 Cherokee XJ, about to scrap for FSJ parts, gone to parts graveyard in sky
-
Ramses659
Topic author - Posts: 3
- Joined: Thu Oct 17, 2019 9:25 pm
Re: New to the forum and FSJs
I will get some more photos of it this week. Dropped a DUI distributor in it today and drove it. Runs great and drives great. Tested the 4x4 and low range. I will get a build thread going and go from there.
-
bbuenger71
- Posts: 217
- Joined: Thu Oct 09, 2014 4:28 pm
- Location: Simi Valley, CA
Re: New to the forum and FSJs
Welcome! Lots of great info and advice here! Nice looking Cherokee.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
1976 Wagoneer
360/TH400/QT
Edelbrock non EGR, Holley 600cfm, 32" BFG Mud Terrain KM2's. Lots of Bondo.
http://fsjnetwork.com/forum/viewtopic.php?f=12&t=7276
360/TH400/QT
Edelbrock non EGR, Holley 600cfm, 32" BFG Mud Terrain KM2's. Lots of Bondo.
http://fsjnetwork.com/forum/viewtopic.php?f=12&t=7276