ABS, panels for wagoneer, J truck, Commando, Jeepster

Post Reply
User avatar

Topic author
men in black
Vendor
Posts: 128
Joined: Mon Jun 11, 2012 9:29 am
Location: Grand Blanc, Mi

Re: ABS, panels for wagoneer, J truck, Commando, Jeepster

Post by men in black »

I do not have any. one side of the ABS has a 150 grit texture the other is smooth.

71J4000 wrote: Fri Oct 30, 2020 1:14 pm Any pictures or the headliner installed on a J truck?
1990 Grand Wagoneer.. black with sand interior.. 70,000 miles,
Razor grille, Hella H4 headlights, Piaa driving, LED spider taillights, tinted windows.
Full Corinthian leather front and rear seat. custom full length center console with cup holders. 100 sf of Rattle-trap on floor. Edelbrock intake and 2132 cam, Howell TBI, Ford Distributor Cap, TFI Ignition Coil, Desmogged

Jeep 401
Posts: 2
Joined: Wed Dec 23, 2020 4:08 am
Location: Zirndorf/Germany

Re: ABS, panels for wagoneer, J truck, Commando, Jeepster

Post by Jeep 401 »

men in black, can you send me a pm or email to cj7v8401@aol.com so i can order the right shift indicator?
thanks
User avatar

Topic author
men in black
Vendor
Posts: 128
Joined: Mon Jun 11, 2012 9:29 am
Location: Grand Blanc, Mi

Re: ABS, panels for wagoneer, J truck, Commando, Jeepster

Post by men in black »

PM sent
1990 Grand Wagoneer.. black with sand interior.. 70,000 miles,
Razor grille, Hella H4 headlights, Piaa driving, LED spider taillights, tinted windows.
Full Corinthian leather front and rear seat. custom full length center console with cup holders. 100 sf of Rattle-trap on floor. Edelbrock intake and 2132 cam, Howell TBI, Ford Distributor Cap, TFI Ignition Coil, Desmogged

Nmelchers
Posts: 15
Joined: Wed Feb 03, 2021 7:09 pm

Re: ABS, panels for wagoneer, J truck, Commando, Jeepster

Post by Nmelchers »

Just picked up a project 1986 Grand Wagoneer. New to the forums so it won't let me send a PM yet. I also was not able to see the pictures of your work. Are you still doing this and if so could you send me some pictures? I'm in need of a headliner and possibly a drivers door panel. Thanks!
1986 Grand Wagoneer AMC 360 Project
User avatar

Topic author
men in black
Vendor
Posts: 128
Joined: Mon Jun 11, 2012 9:29 am
Location: Grand Blanc, Mi

Re: ABS, panels for wagoneer, J truck, Commando, Jeepster

Post by men in black »

Go to page six and scroll down a bit I had to repost the photos
Yes I'm still making them

I sent you a PM
1990 Grand Wagoneer.. black with sand interior.. 70,000 miles,
Razor grille, Hella H4 headlights, Piaa driving, LED spider taillights, tinted windows.
Full Corinthian leather front and rear seat. custom full length center console with cup holders. 100 sf of Rattle-trap on floor. Edelbrock intake and 2132 cam, Howell TBI, Ford Distributor Cap, TFI Ignition Coil, Desmogged

JRod81Cherokee
Posts: 34
Joined: Mon Mar 29, 2021 7:18 pm
Location: Oklahoma

Re: ABS, panels for wagoneer, J truck, Commando, Jeepster

Post by JRod81Cherokee »

Men in Black,
Can you send me a pm. I would like to order some panels. Thanks.
I roll in a 1981 Jeep Cherokee
User avatar

Topic author
men in black
Vendor
Posts: 128
Joined: Mon Jun 11, 2012 9:29 am
Location: Grand Blanc, Mi

Re: ABS, panels for wagoneer, J truck, Commando, Jeepster

Post by men in black »

Yes you can
JRod81Cherokee wrote: Tue Apr 06, 2021 7:27 pm Men in Black,
Can you send me a pm. I would like to order some panels. Thanks.
1990 Grand Wagoneer.. black with sand interior.. 70,000 miles,
Razor grille, Hella H4 headlights, Piaa driving, LED spider taillights, tinted windows.
Full Corinthian leather front and rear seat. custom full length center console with cup holders. 100 sf of Rattle-trap on floor. Edelbrock intake and 2132 cam, Howell TBI, Ford Distributor Cap, TFI Ignition Coil, Desmogged

JRod81Cherokee
Posts: 34
Joined: Mon Mar 29, 2021 7:18 pm
Location: Oklahoma

Re: ABS, panels for wagoneer, J truck, Commando, Jeepster

Post by JRod81Cherokee »

It’s an ‘81 Cherokee.
I need doors, and rear panels.
My door panels will need electrical cutouts. It has Manuel mirror controls. I don’t need speaker cutouts in any of the panels.
What other information do you need?
I roll in a 1981 Jeep Cherokee
User avatar

Topic author
men in black
Vendor
Posts: 128
Joined: Mon Jun 11, 2012 9:29 am
Location: Grand Blanc, Mi

Re: ABS, panels for wagoneer, J truck, Commando, Jeepster

Post by men in black »

Do you need just six panels or also the tailgate?

Pm Me I'll give you my number so you can text me, its faster

Eric
JRod81Cherokee wrote: Wed Apr 07, 2021 3:35 pm It’s an ‘81 Cherokee.
I need doors, and rear panels.
My door panels will need electrical cutouts. It has Manuel mirror controls. I don’t need speaker cutouts in any of the panels.
What other information do you need?
1990 Grand Wagoneer.. black with sand interior.. 70,000 miles,
Razor grille, Hella H4 headlights, Piaa driving, LED spider taillights, tinted windows.
Full Corinthian leather front and rear seat. custom full length center console with cup holders. 100 sf of Rattle-trap on floor. Edelbrock intake and 2132 cam, Howell TBI, Ford Distributor Cap, TFI Ignition Coil, Desmogged
User avatar

ProTouring442
Posts: 673
Joined: Sat Mar 23, 2013 10:28 am
Location: Harriman, Tennessee
Contact:

Re: ABS, panels for wagoneer, J truck, Commando, Jeepster

Post by ProTouring442 »

men in black wrote: Wed Apr 07, 2021 11:57 pm
Can you make them in 1/4" plywood (like below)?

https://www.homedepot.com/p/Columbia-Fo ... /100092485

JRod81Cherokee
Posts: 34
Joined: Mon Mar 29, 2021 7:18 pm
Location: Oklahoma

Re: ABS, panels for wagoneer, J truck, Commando, Jeepster

Post by JRod81Cherokee »

The forum won't let me PM. Try to pm me and we can swap info.
I roll in a 1981 Jeep Cherokee
User avatar

ProTouring442
Posts: 673
Joined: Sat Mar 23, 2013 10:28 am
Location: Harriman, Tennessee
Contact:

Re: ABS, panels for wagoneer, J truck, Commando, Jeepster

Post by ProTouring442 »

JRod81Cherokee wrote: Thu Apr 08, 2021 8:46 pm The forum won't let me PM. Try to pm me and we can swap info.
Sent a PM... did you get it?
User avatar

Topic author
men in black
Vendor
Posts: 128
Joined: Mon Jun 11, 2012 9:29 am
Location: Grand Blanc, Mi

Re: ABS, panels for wagoneer, J truck, Commando, Jeepster

Post by men in black »

No I did not get it, I sent you one
ProTouring442 wrote: Fri Apr 16, 2021 5:42 am
JRod81Cherokee wrote: Thu Apr 08, 2021 8:46 pm The forum won't let me PM. Try to pm me and we can swap info.
Sent a PM... did you get it?
1990 Grand Wagoneer.. black with sand interior.. 70,000 miles,
Razor grille, Hella H4 headlights, Piaa driving, LED spider taillights, tinted windows.
Full Corinthian leather front and rear seat. custom full length center console with cup holders. 100 sf of Rattle-trap on floor. Edelbrock intake and 2132 cam, Howell TBI, Ford Distributor Cap, TFI Ignition Coil, Desmogged
User avatar

Stuka
Site Admin
Posts: 11789
Joined: Thu May 12, 2011 5:53 pm
Location: CA
Contact:

Re: ABS, panels for wagoneer, J truck, Commando, Jeepster

Post by Stuka »

JRod81Cherokee wrote: Thu Apr 08, 2021 8:46 pm The forum won't let me PM. Try to pm me and we can swap info.
You just need more posts (at least 10). Its done to prevent spam bots from being able to PM every single person right off the bat.

You should be able to PM now.
2017 JKU Rubicon
Pevious Jeeps: 1981 J10, 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ

JRod81Cherokee
Posts: 34
Joined: Mon Mar 29, 2021 7:18 pm
Location: Oklahoma

Re: ABS, panels for wagoneer, J truck, Commando, Jeepster

Post by JRod81Cherokee »

Gotcha
I roll in a 1981 Jeep Cherokee

Racn400
Posts: 3
Joined: Sat May 08, 2021 2:20 am

Re: ABS, panels for wagoneer, J truck, Commando, Jeepster

Post by Racn400 »

Need a White Shift Indicator for a 1982 Jeep J10 please contact me thanks.
User avatar

Topic author
men in black
Vendor
Posts: 128
Joined: Mon Jun 11, 2012 9:29 am
Location: Grand Blanc, Mi

Re: ABS, panels for wagoneer, J truck, Commando, Jeepster

Post by men in black »

Racn400 PM sent
1990 Grand Wagoneer.. black with sand interior.. 70,000 miles,
Razor grille, Hella H4 headlights, Piaa driving, LED spider taillights, tinted windows.
Full Corinthian leather front and rear seat. custom full length center console with cup holders. 100 sf of Rattle-trap on floor. Edelbrock intake and 2132 cam, Howell TBI, Ford Distributor Cap, TFI Ignition Coil, Desmogged
User avatar

ProTouring442
Posts: 673
Joined: Sat Mar 23, 2013 10:28 am
Location: Harriman, Tennessee
Contact:

Re: ABS, panels for wagoneer, J truck, Commando, Jeepster

Post by ProTouring442 »

Just have to give a big Thumbs Up! to Men in Black. I requested panels in high-end plywood, and he did an amazing job. I can't say enough about his customer service, communication, etc.

Thanks again!!
User avatar

fulsizjeep
Moderator
Posts: 5012
Joined: Sun Nov 06, 2011 7:21 am
Location: Fruitville, FL
Contact:

Re: ABS, panels for wagoneer, J truck, Commando, Jeepster

Post by fulsizjeep »

ProTouring442 wrote: Sun May 09, 2021 7:29 am Just have to give a big Thumbs Up! to Men in Black. I requested panels in high-end plywood, and he did an amazing job. I can't say enough about his customer service, communication, etc.

Thanks again!!
Eric is a good fella. :-bd

Got any pictures of those panels yet?
Flint Boardman
88 GW, 401/727/208, 5" lift, D44s/4.10s/locked up, 35s
https://jubileejeeps.org/quadratrac

mudinui
Posts: 1
Joined: Tue Jun 08, 2021 1:34 pm

Re: ABS, panels for wagoneer, J truck, Commando, Jeepster

Post by mudinui »

Are you still making ABS panels for 1978 j-10 with role-up windows? Can you give me a price and lead time? thx, Don
Post Reply