Tall driver and a Jeep FSJ (1975 Wagoneer), is it possible?

Area for General FSJ related chat.
Post Reply

Topic author
DutchWolverine
Posts: 1
Joined: Mon May 10, 2021 2:51 pm

Tall driver and a Jeep FSJ (1975 Wagoneer), is it possible?

Post by DutchWolverine »

Hey everyone! I’ve been looking for a vintage truck or SUV for a fun project, and ran across a really decent 1975 Wagoneer. However, I’m 6’5” and concerned about if I can comfortably fit (legroom and especially headroom). I’m a 34”-36” inseam depending on pants. The one I found has the bench seat and tilt wheel. It’s several states away so I unfortunately can’t sit in it in person. Any feedback from fellow giraffe-sized FSJ owners? Thanks!
User avatar

Stuka
Site Admin
Posts: 11804
Joined: Thu May 12, 2011 5:53 pm
Location: CA
Contact:

Re: Tall driver and a Jeep FSJ (1975 Wagoneer), is it possible?

Post by Stuka »

I am 6ft 3in tall, 34 inseam. And I have fit pretty well in both a Cherokee/Wagoneer, and a J-Truck. The J-Truck has tons of headroom, but does have less leg room. In my Cherokee, I actually never had the seats fully back, it was 1-2 clicks forward.

The one thing to be aware of is they do not have a telescoping steering wheel, so the farther back the seat goes, the more your arms reach out. Tilt wheel was optional for 66 and newer. Standard on Grand Wagoneers (84+).

And as an interesting comparison, Arnold Schwarzenegger owned a Grand Wagoneer for many years.

So I guess my best answer is "most likely". I guess it kind of depends how long you intend on driving. Driving around town is different than 4 hours on the HWY.
2017 JKU Rubicon
Pevious Jeeps: 1981 J10, 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ

will e
Posts: 5103
Joined: Sat Aug 18, 2012 8:21 am

Re: Tall driver and a Jeep FSJ (1975 Wagoneer), is it possible?

Post by will e »

I am 6ft 4. I fit in the wagoneer with the stock bucket seat. My head was pretty close to the headliner but it worked.
81 Waggy 'WILL E' Retired
82 Cherokee WT - SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau XRS Baja & 5 point retractable harness/Hella Aux lights/tuffy console/killer32 sliders/Evil Twin bumpers, rack and roll cage/WARN 8000/TT Fabworks steering brace/dual batts/custom TC skid plate/ARB fridge
Post Reply