What’s the Term?

Area for post regarding Jeeps other than an FSJ. This area may contain technical post regarding those vehicles as well.
Post Reply
User avatar

Topic author
66stepside
Posts: 3793
Joined: Sat Oct 13, 2012 9:59 pm
Location: Spokane Valley, WA.

What’s the Term?

Post by 66stepside »

What’s the technical term for the piece that is welded to the front of the fender? Is there a tech term for it?

Image


Sent from my iPhone using Tapatalk
User avatar

Stuka
Site Admin
Posts: 11789
Joined: Thu May 12, 2011 5:53 pm
Location: CA
Contact:

Re: What’s the Term?

Post by Stuka »

Its a different piece of metal, but is technically part of the fender itself. I guess you could call it a fenderlet. But I guess could also be a corner valance piece. I don't have a TSM handy to look to see what it references that as.
2017 JKU Rubicon
Pevious Jeeps: 1981 J10, 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ
User avatar

Topic author
66stepside
Posts: 3793
Joined: Sat Oct 13, 2012 9:59 pm
Location: Spokane Valley, WA.

Re: What’s the Term?

Post by 66stepside »

Thank you. There are many different terms I’ve seen/heard used- Fender Corner is another one. I was thinking there might be an actual term for it.

Thanks again.


Sent from my iPhone using Tapatalk
User avatar

Stuka
Site Admin
Posts: 11789
Joined: Thu May 12, 2011 5:53 pm
Location: CA
Contact:

Re: What’s the Term?

Post by Stuka »

66stepside wrote: Wed Feb 12, 2020 7:08 pm Thank you. There are many different terms I’ve seen/heard used- Fender Corner is another one. I was thinking there might be an actual term for it.

Thanks again.


Sent from my iPhone using Tapatalk
So, according to the TSM, its an "Extension"

Image
You do not have the required permissions to view the files attached to this post.
2017 JKU Rubicon
Pevious Jeeps: 1981 J10, 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ
User avatar

Topic author
66stepside
Posts: 3793
Joined: Sat Oct 13, 2012 9:59 pm
Location: Spokane Valley, WA.

Re: What’s the Term?

Post by 66stepside »

Stuka wrote:
66stepside wrote: Wed Feb 12, 2020 7:08 pm Thank you. There are many different terms I’ve seen/heard used- Fender Corner is another one. I was thinking there might be an actual term for it.

Thanks again.


Sent from my iPhone using Tapatalk
So, according to the TSM, its an "Extension"

Image

Very cool info, thank you. Kinda interesting that there’s no separation of terms for a part that’s welded on, but separate names for bolt on pieces and parts.


Sent from my iPhone using Tapatalk
Post Reply