1987 wagoneer turn signal stock

Stock FSJ Tech Area
Post Reply

Topic author
COjeeper
Posts: 37
Joined: Tue Apr 27, 2021 9:29 am
Location: Mountains outside of Denver

1987 wagoneer turn signal stock

Post by COjeeper »

Hey guys, stupid question! I just finally got my new stock fished through the steering column and completely forgot where I unplugged the old one from. Could someone do me a favor and tell me where I need to plug it back in at?

sirrus
Vendor
Posts: 717
Joined: Fri Sep 13, 2019 11:13 pm
Location: Hillsboro, OR

Re: 1987 wagoneer turn signal stock

Post by sirrus »

Stalk itself has a 4 pin connector only for cruise control, it plugs into circled connectors the pic below. It’s my modified cruise harness, so yours will look different, but connector is the same. It should be dangling somewhere under dash

Image

Turn signals are controlled by a switch inside column that stalk is pushed into

Image
Now that is plugged into long connector on the bottom of steering column.

Hope that helps
Sometimes we reinvent the wheel not to have more wheels but to have more inventors

1988 Grand Wagoneer - AMC 360 with ProFlo4 MPFI, TF727, NP229 FOR SALE
2021 JLU Willys EcoDiesel - new shiny toy

Topic author
COjeeper
Posts: 37
Joined: Tue Apr 27, 2021 9:29 am
Location: Mountains outside of Denver

Re: 1987 wagoneer turn signal stock

Post by COjeeper »

Thanks for the reply. I found the cruise control module and traced the wires and found the plug, thanks for your help.
Post Reply