Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
That's exciting! I'm finally getting my slots polished up and waxed, and I ordered a matching spare from a friend from IFSJA. Hopefully I'll be getting a fresh set of 5 tires (and with the matching spare it can be in the rotation!) pretty soon...we'll see
With great optimism comes great frustration from those who don't fabricate the bandwagon they jump on, as well as a responsibility to make sure the bandwagon is strong enough when others start jumping on it.
As I want this rig to be a mule for towing and hauling, I want at least 8 ply, but also an A/T closer to road tread for more hiway use vs off road.
Thinking either 30x9x15 or 31x10.5x15 (has that now), but budget says around $150 a tire.
Is this even possible? Thinking Discount Tire to start, with a ton of local shops available as well.
Tried looking at tires online, and the info is like trying to learn another language, but a bird in the hand for me is priceless.
I want to see it to compare one over another.
'81 CJ5 Base, 258 I6, MC2100, T176 4 spd, 300 TC, D30 Front NT, 3.31, 2-Piece AMC 20 rear NT, 3.31, 4" high arc spring lift
'84 Grand Wagoneer, 401 V8 (.030 over), MC2150 HA Comp, 727 auto, Selec-trac NP229, AMC 20 REAR - D44 FRONT - WT 3.31, 4" high arc spring lift
Rather be driving, than waiting to be modified
That is what I have on my CJ5, but those are about 20 years old.
Bought it with those on it in 2019, and I think we figured they were 2003 tires?
Something like that, but it gets driven enough to keep them in shape.
'81 CJ5 Base, 258 I6, MC2100, T176 4 spd, 300 TC, D30 Front NT, 3.31, 2-Piece AMC 20 rear NT, 3.31, 4" high arc spring lift
'84 Grand Wagoneer, 401 V8 (.030 over), MC2150 HA Comp, 727 auto, Selec-trac NP229, AMC 20 REAR - D44 FRONT - WT 3.31, 4" high arc spring lift
Rather be driving, than waiting to be modified
If you can find a sale on Good Years, I've heard/read good things about the Trail Runners, both on here and in person. I'm not going to go to them personally, but I'm sticking with a 225/75r15 A/S anyway.
If you're ok with running a 235/75r15 (stock size), you can get the all seasons with lots of towing capacity pretty cheap. I was looking pretty hard at the Toyo Celsius tires (which they make for cars as severe snow service rated, and trucks as not). The 235/75r15 is going to be a lot cheaper but I can see why you'd want the bigger tires.
With great optimism comes great frustration from those who don't fabricate the bandwagon they jump on, as well as a responsibility to make sure the bandwagon is strong enough when others start jumping on it.
Not so much sold on bigger tires, as I like the smaller diameter for torque reasons, and could not give a crap about the looks.
Rather have it carry the load, have the power band where it needs to be, over what others think it should "look" like while it does what I want.
95% of my planned use is as a mule, to carry cargo and pull trailers on the road, so a quiter AT tread is preferred.
Problem with the stock tires was the ply rating was mostly for comfort, and not so much for heavier loads, so once you start adding ply ratings the cost goes up.
Someone suggested the Dextero AT sold at Walmart for $124, which is not bad, and said 8 ply 31x10.5x15
'81 CJ5 Base, 258 I6, MC2100, T176 4 spd, 300 TC, D30 Front NT, 3.31, 2-Piece AMC 20 rear NT, 3.31, 4" high arc spring lift
'84 Grand Wagoneer, 401 V8 (.030 over), MC2150 HA Comp, 727 auto, Selec-trac NP229, AMC 20 REAR - D44 FRONT - WT 3.31, 4" high arc spring lift
Rather be driving, than waiting to be modified
'81 CJ5 Base, 258 I6, MC2100, T176 4 spd, 300 TC, D30 Front NT, 3.31, 2-Piece AMC 20 rear NT, 3.31, 4" high arc spring lift
'84 Grand Wagoneer, 401 V8 (.030 over), MC2150 HA Comp, 727 auto, Selec-trac NP229, AMC 20 REAR - D44 FRONT - WT 3.31, 4" high arc spring lift
Rather be driving, than waiting to be modified
Went with Discount Tire and the Pathfinder 235x75Rx15 XT Owl, and they are only about 1/2 inch shorter than the 31's, but higher load capacity, which is what my use will be, and not needing the off road tread.
All in @ $376 for 2 tires @ $125 ea with all the bells & whistles.
'81 CJ5 Base, 258 I6, MC2100, T176 4 spd, 300 TC, D30 Front NT, 3.31, 2-Piece AMC 20 rear NT, 3.31, 4" high arc spring lift
'84 Grand Wagoneer, 401 V8 (.030 over), MC2150 HA Comp, 727 auto, Selec-trac NP229, AMC 20 REAR - D44 FRONT - WT 3.31, 4" high arc spring lift
Rather be driving, than waiting to be modified
With great optimism comes great frustration from those who don't fabricate the bandwagon they jump on, as well as a responsibility to make sure the bandwagon is strong enough when others start jumping on it.
Stoffregen M-sports wrote: ↑Sun Mar 05, 2023 12:48 pm
If it has been lifted, then yes, the angle shims could have been installed to correct pinion angle. The front may need them too to correct caster.
'81 CJ5 Base, 258 I6, MC2100, T176 4 spd, 300 TC, D30 Front NT, 3.31, 2-Piece AMC 20 rear NT, 3.31, 4" high arc spring lift
'84 Grand Wagoneer, 401 V8 (.030 over), MC2150 HA Comp, 727 auto, Selec-trac NP229, AMC 20 REAR - D44 FRONT - WT 3.31, 4" high arc spring lift
Rather be driving, than waiting to be modified
Yep, but my wheelin will be 95% paved or gravel roads, not wheelin like your talkin....wheelin!
I have a CJ5 for that
'81 CJ5 Base, 258 I6, MC2100, T176 4 spd, 300 TC, D30 Front NT, 3.31, 2-Piece AMC 20 rear NT, 3.31, 4" high arc spring lift
'84 Grand Wagoneer, 401 V8 (.030 over), MC2150 HA Comp, 727 auto, Selec-trac NP229, AMC 20 REAR - D44 FRONT - WT 3.31, 4" high arc spring lift
Rather be driving, than waiting to be modified
With great optimism comes great frustration from those who don't fabricate the bandwagon they jump on, as well as a responsibility to make sure the bandwagon is strong enough when others start jumping on it.
All good as we love to see all the toys we play with
'81 CJ5 Base, 258 I6, MC2100, T176 4 spd, 300 TC, D30 Front NT, 3.31, 2-Piece AMC 20 rear NT, 3.31, 4" high arc spring lift
'84 Grand Wagoneer, 401 V8 (.030 over), MC2150 HA Comp, 727 auto, Selec-trac NP229, AMC 20 REAR - D44 FRONT - WT 3.31, 4" high arc spring lift
Rather be driving, than waiting to be modified
Found the parasitic bleed seemed to come from the alternator, as it would get warm if neg cable left on when engine shut off.....ok, so we found the #2 post on the plug in was wired to batt post on alternator.
Took that off and no more bleed.....but no charging either.....#2 wire went back to batt post on alternator....charging again.
In the process we fried the #2 on the plug of new alternator, so old alternator went back on the truck, but now to find where the bleed is.....again we search :/
Tried to bleed brakes and back bleeders are fused to the casting of wheel cylinders.
New wheel cylinders on the way.
Got the 2 new tires, so can drive it around the block, and transmission shifts really smooth and when it should.
Get the other 2 tires next week and can get going more than 25 mph, to see how it feels getting back to life again.
'81 CJ5 Base, 258 I6, MC2100, T176 4 spd, 300 TC, D30 Front NT, 3.31, 2-Piece AMC 20 rear NT, 3.31, 4" high arc spring lift
'84 Grand Wagoneer, 401 V8 (.030 over), MC2150 HA Comp, 727 auto, Selec-trac NP229, AMC 20 REAR - D44 FRONT - WT 3.31, 4" high arc spring lift
Rather be driving, than waiting to be modified
With great optimism comes great frustration from those who don't fabricate the bandwagon they jump on, as well as a responsibility to make sure the bandwagon is strong enough when others start jumping on it.