Well ive been sick with bronchitus for the past week i suspect from breathing in exhaust fumes in my garage tgis Jeep seems to be putting some pretty noxious fumes out even with the doors windows open in the shop. Ima have to put my 50 inch fan by the tailpipe to blow outside the doors next time
Anyway. Im feeling better today so i went out to try a few bolts just to see.
What size are the heads on these ? 12mm is too small and 1.2 seems to fit but loosely . The first bolt i tried was the one where the horrible exhaust leak is. And it was loose. Just spun freely.. actually needed tightened 1.2 a turn.. i tried that but still leaks so the gasket is gone. Anyway that bolt is out. The next one on the outside wasnt too hard either.. had resistance.. so i tightened.. losend.. tightened losend and it came out.
Hopefully theyre all like this. I just sprayed em all with pb blaster and ill come back later when im not dizzy and high on medication
Any suggestions on a socket for them ? Since they seem to be lose with 1.2 but 12 wont fit. Also the middle bolts. The heads seem larger lol. I though the middle were smaller and outaide larger.. ? Lol.
Im almost thinking of tossing these manifolds and getting headers. What do you guys think of these ?
https://www.summitracing.com/parts/hed- ... XWEALw_wcB