Looking for the 4 corner pieces of headliner trim

[ctas]

These are the small plastic pieces at the upper corners of the windshield and rear window that are held on by a single screw each. Ideally in black, but any color is fine and I’ll paint. Pictures of what I need are attached. Shipped to 94403.

Thank you

[devildog80]

These could be made with a 3D printer, but might still be some out there.
I know I will need some too as mine turned to dust when I pulled my headliner down a few months back.
Might need to whittle some out of wood.

[ctas]

I’d be fine with a 3d printed one, but all I have is a single front corner that is broken in 3 pieces, so at least need something to start with.

[SJTD]

One of my fronts broke and I misplaced half of it so I carved some patterns and heat formed them out of ABS. Kinda crude but got used to them and I never look at them anyway. The originals didn't look much better since they were deformed from the heat.

[ctas]

One of my fronts broke and I misplaced half of it so I carved some patterns and heat formed them out of ABS. Kinda crude but got used to them and I never look at them anyway. The originals didn't look much better since they were deformed from the heat.

Interesting. What thickness ABS did you use?

[candymancan]

I have these. Let me look for all 4. But i know i have them all. Invluding the plastic center brace and metal trim. Also have the two coat hangars too.

The coat hangars will be an orange color. The plastic corners youre looking for will be the cordovan.

Lemme know if interested still. Ill go in my shop and look but i know i have them

[candymancan]

Ok i found thrm. Guess i have 3 of one and one of another. And two cordovan coat hangars.

The lone one corner does hsve a split in it slightky. But not noticable nore really important.

But i have 3 of the front. 1 of the rear. Or is it 3 rear 1 front not sure.


Cant find the 2nd one. Dunno if youre interested in the 3 or 4. And coat hangars ? Let me know. I mist have the missing pairs somewhere but i cant find em right now.

[ctas]

Hi Candyman. Thanks for looking, but I bought some on eBay already. I probably paid way too much, but it looked bad without them.

[SJTD]

One of my fronts broke and I misplaced half of it so I carved some patterns and heat formed them out of ABS. Kinda crude but got used to them and I never look at them anyway. The originals didn't look much better since they were deformed from the heat.

Interesting. What thickness ABS did you use?

Used 1/16".

[ntsqd]

Candyman, since the OP passed on these I am interested in them and any of the other related pieces that you might have.

[candymancan]

Sent you a pm