I don't have any good before pictures, but this should give you an idea:
![Image](http://i1033.photobucket.com/albums/a415/tudrewser/100_1022_zps1c3c40ed.jpg)
Granted, that was when we were installing some garage cabinets years ago, so everything was pushed to the middle. But the garage was our storage shed.
After a weekend and holiday of work, it now looks like this:
![Image](http://i1033.photobucket.com/albums/a415/tudrewser/2014-01-02081032_zps5aae0dd1.jpg)
I bought the workbench at HF, but I glued every joint as I put it together and it's pretty rock solid now. As we were pulling away from the HF pickup, my wife spotted the sheet of peg board leaning up against a dumpster. Had a piece cut out, but that piece was there too. Yay! Used that piece for my air tools. Plan is to now build a welding table and put it on the left to complete my side of the garage (I've only been allowed half the garage so far
![Wink ;-)](./images/smilies/icon_e_wink.gif)
Anyway, just thought I'd share. Can't wait to work on the jeep with all my tools at the ready instead of working in my neighbor's driveway.