Which/ where do these wires go?

Stock FSJ Tech Area
Post Reply
User avatar

Topic author
RanchGX
Posts: 41
Joined: Tue Mar 26, 2013 10:11 am
Location: Dallas/ Phoenix/ Baja

Which/ where do these wires go?

Post by RanchGX »

So I got caught up in replacing broken wires on my rig, and halfway through realized that I didn't label all of the. FML


So I need some assistance.

Where exactly the posts on the starter relay go to? Bal, I, G dont help me.....
Image

Also the wire diagram says that a green ignition wire goes to the positive battery terminal on the solenoid. Is that the one the is the solid green wire out of the ignition box, or something else?


Im using the diagrams from here: http://oljeep.com/gw/elec/GW_wiring-1990.html

What does it mean when the diagram says "See SH 5" I've been looking all over and cant find any SH references. It's driving me insane.
1988 Jeep Grand Wagoneer 1 owner
TFI Ignition (cap/ rotor & ignition coil)
MSD 6al Ignition Box
Dana 70 rear axle
Steering rag joint delete
Electric Fuel Pump
6 pt cage
4" BJ's lift
33" tires
AC -> OBA conversion
4 BBL Edelbrock 1406 + Edelbrock intake manifold
Side exit exhaust
Hydroboost brakes
RedHead Steering Box- custom specs
3 core radiator- special built for towing
Smog pump removed
Evap Charcoal canister removed

chevelleguy
Posts: 379
Joined: Mon Oct 08, 2012 10:11 am
Location: Hughes Springs, TX

Re: Which/ where do these wires go?

Post by chevelleguy »

You should put your vehicle in your signature line so we know what your working on.
David
'83 Wag Limited, 360/727/pinned 229/D44 front/AMC20,lockrite,rear/6" BJ lift w/ 35/12.50/15 M/T Baja MTZ/ Pro-Jection EFI.

'16 Camaro SS
'98 STX1100 Jet ski
'96 ZXi 1100 Jet ski
'90 KDX 200
User avatar

Topic author
RanchGX
Posts: 41
Joined: Tue Mar 26, 2013 10:11 am
Location: Dallas/ Phoenix/ Baja

Re: Which/ where do these wires go?

Post by RanchGX »

1988 grand wagoner
1988 Jeep Grand Wagoneer 1 owner
TFI Ignition (cap/ rotor & ignition coil)
MSD 6al Ignition Box
Dana 70 rear axle
Steering rag joint delete
Electric Fuel Pump
6 pt cage
4" BJ's lift
33" tires
AC -> OBA conversion
4 BBL Edelbrock 1406 + Edelbrock intake manifold
Side exit exhaust
Hydroboost brakes
RedHead Steering Box- custom specs
3 core radiator- special built for towing
Smog pump removed
Evap Charcoal canister removed

Racegas
Posts: 27
Joined: Sun Mar 17, 2013 1:50 pm

Re: Which/ where do these wires go?

Post by Racegas »

I believe that SH 5 refers to that sheet number of the entire diagram.
Robert E Lee
89 GW White/Maroon, Son's DD

89 GW Silver/Maroon/Rust, parts car
User avatar

jaber
Vendor
Posts: 3066
Joined: Sat Aug 27, 2011 5:24 pm
Location: Chino Valley, Az.

Re: Which/ where do these wires go?

Post by jaber »

Here is the pinout for the relay...

http://oljeep.com/gw/elec/90_numeric/90 ... lenoid.jpg

In the bottom corner of each page there is an SJ#, and it corresponds with the SH#s, so sh7 is page sj7. I pulled both pages up and verified. ;)
Jeff

'46 cj3a
'51 Willys p/u
'51 Willys Parkway Conversion
'74 CJ5
'75 J-20 Wrecker
'75 J-20 Cummins service truck
'77 J-10 p/u
'79 Cherokee
'88 Grand Wagoneer
http://s252.photobucket.com/albums/hh14/jeffaber/
User avatar

Topic author
RanchGX
Posts: 41
Joined: Tue Mar 26, 2013 10:11 am
Location: Dallas/ Phoenix/ Baja

Re: Which/ where do these wires go?

Post by RanchGX »

jaber wrote:Here is the pinout for the relay...

http://oljeep.com/gw/elec/90_numeric/90 ... lenoid.jpg

In the bottom corner of each page there is an SJ#, and it corresponds with the SH#s, so sh7 is page sj7. I pulled both pages up and verified. ;)

Only problem with that diagram is that it is missing the BAL listed on it. I know something goes there, just cant remember what.
1988 Jeep Grand Wagoneer 1 owner
TFI Ignition (cap/ rotor & ignition coil)
MSD 6al Ignition Box
Dana 70 rear axle
Steering rag joint delete
Electric Fuel Pump
6 pt cage
4" BJ's lift
33" tires
AC -> OBA conversion
4 BBL Edelbrock 1406 + Edelbrock intake manifold
Side exit exhaust
Hydroboost brakes
RedHead Steering Box- custom specs
3 core radiator- special built for towing
Smog pump removed
Evap Charcoal canister removed
User avatar

jaber
Vendor
Posts: 3066
Joined: Sat Aug 27, 2011 5:24 pm
Location: Chino Valley, Az.

Re: Which/ where do these wires go?

Post by jaber »

I believe its the wire to the starter. ;)
Jeff

'46 cj3a
'51 Willys p/u
'51 Willys Parkway Conversion
'74 CJ5
'75 J-20 Wrecker
'75 J-20 Cummins service truck
'77 J-10 p/u
'79 Cherokee
'88 Grand Wagoneer
http://s252.photobucket.com/albums/hh14/jeffaber/

csuengr
Posts: 1290
Joined: Sun Mar 24, 2013 10:24 am
Location: Sterling, CO

Re: Which/ where do these wires go?

Post by csuengr »

Black wire that goes to the starter goes on SOL terminal, along with the wire to the ignition coil. Ground goes to NSS wire. Start signal wire goes to I terminal
1977 Cherokee S, Ford 5.0, 5 speed, BW 1356, 33 x 10.50 BFG's. No longer my DD.
2007 Mercury Milan, 2.3L, 5-speed, now my DD. 29 mpg average.
User avatar

Topic author
RanchGX
Posts: 41
Joined: Tue Mar 26, 2013 10:11 am
Location: Dallas/ Phoenix/ Baja

Re: Which/ where do these wires go?

Post by RanchGX »

csuengr wrote:Black wire that goes to the starter goes on SOL terminal, along with the wire to the ignition coil. Ground goes to NSS wire. Start signal wire goes to I terminal

So BAL does not get used then correct?
1988 Jeep Grand Wagoneer 1 owner
TFI Ignition (cap/ rotor & ignition coil)
MSD 6al Ignition Box
Dana 70 rear axle
Steering rag joint delete
Electric Fuel Pump
6 pt cage
4" BJ's lift
33" tires
AC -> OBA conversion
4 BBL Edelbrock 1406 + Edelbrock intake manifold
Side exit exhaust
Hydroboost brakes
RedHead Steering Box- custom specs
3 core radiator- special built for towing
Smog pump removed
Evap Charcoal canister removed

csuengr
Posts: 1290
Joined: Sun Mar 24, 2013 10:24 am
Location: Sterling, CO

Re: Which/ where do these wires go?

Post by csuengr »

I've never seen that terminal before. Just let us know if you have an extra wire in that area.
1977 Cherokee S, Ford 5.0, 5 speed, BW 1356, 33 x 10.50 BFG's. No longer my DD.
2007 Mercury Milan, 2.3L, 5-speed, now my DD. 29 mpg average.

rocklaurence
Vendor
Posts: 2565
Joined: Sat Mar 30, 2013 6:53 am

Re: Which/ where do these wires go?

Post by rocklaurence »

Could it be for the ignition coil ballast resistor? A resistive wire used in the run mode?
User avatar

GonOvr
Posts: 36
Joined: Thu Jun 27, 2013 9:21 pm
Location: Worldwide

Re: Which/ where do these wires go?

Post by GonOvr »

Not sure if you figured this out or not but here...

Image
Image
Post Reply