Page 2 of 2

Re: 2016 parts

Posted: Wed Jun 29, 2016 6:33 am
by Grand_Wag_85
I need a driver side Amber parking light for an 80's truck. I left the old one somewhere on Imogene Pass.

Re: 2016 parts

Posted: Wed Jun 29, 2016 6:52 am
by Jeepin Divas 401
We have a few we can bring Sean or do you need it sooner.

Re: 2016 parts

Posted: Wed Jun 29, 2016 7:04 am
by Grand_Wag_85
Jeepin Divas 401 wrote:We have a few we can bring Sean or do you need it sooner.
Just bring them with you guys. I'm gonna throw an amber light bulb in the socket to be quasi legal.

Thanks!

Re: 2016 parts

Posted: Thu Jun 30, 2016 8:13 pm
by Nikkormat
I'm going to bring a box of stuff and setup on my tailgate like Jerry does. Does anyone need dash wiring harnesses? Carburetors? NP208's?

Re: 2016 parts

Posted: Sat Jul 02, 2016 7:43 pm
by jsinajeep
Well there is no need for my tail gate set empty so I will be bring a bunch of TSM and Repair manual
and a few other parts. manual date from 65 to 91.

Re: 2016 parts

Posted: Sun Jul 03, 2016 7:18 pm
by derf
I'll be looking for manuals that cover a 1969 if you have them.

Re: 2016 parts

Posted: Mon Jul 04, 2016 1:50 pm
by will e
I have some wide trac amc 20 axle shafts.
Dutchman Rear Alloy Axle Shafts

I also have a set of used 82 wide track cheroke axles shafts, front and rear. Fronts include the outers. Spares are a nice thing to have.

Re: 2016 parts

Posted: Tue Jul 05, 2016 9:07 am
by AMCdealer
Grand_Wag_85 wrote:I've got 2 OE radiators BUT they're for the 258. Get me some measurements and I'll scope them out.
Don't think I'd have room to bring one home, now. Thanks, though!

Re: 2016 parts

Posted: Tue Jul 05, 2016 8:59 pm
by Grand_Wag_85
No problemo AMCDealer. Wish I was going thru your way I'd leave it at your place.

I'm looking for a steering column for an 86 GW with the new dash.

Re: 2016 parts

Posted: Wed Jul 06, 2016 6:37 am
by will e
AMCdealer wrote:
will e wrote:I have a BJ's aluminum radiator. It leaks and has been sitting in my back yard for about 7 years. It weeps just a little from where the fins connect to the tank. Someone with skillz could fix it. Let me know if you are interested.

My ability to bring it will depend on if I drive the Jeep up or tow it. If I drive the jeep I will be short on space. If I tow it I will have lots of rooms for parts.
I need a really cheap radiator so I can run/move the Joplin tornado victim '88 Wag (360) around. If it leaks it's fine as long as I can run it a little while to move it around. If you still have it let me know and what you'd want for it. (And if you're going to have the room.)

If anybody else has a super-cheap/free radiator let me know. Like I said above, minor leaks are fine I just need something to move a Jeep around my property with. I donated its original to someone as a favor.
If all goes well I will be trailering the Jeep this year and should have room. I will bring it along.

Re: 2016 parts

Posted: Wed Jul 06, 2016 6:59 am
by AMCdealer
will e wrote:
AMCdealer wrote:
will e wrote:I have a BJ's aluminum radiator. It leaks and has been sitting in my back yard for about 7 years. It weeps just a little from where the fins connect to the tank. Someone with skillz could fix it. Let me know if you are interested.

My ability to bring it will depend on if I drive the Jeep up or tow it. If I drive the jeep I will be short on space. If I tow it I will have lots of rooms for parts.
I need a really cheap radiator so I can run/move the Joplin tornado victim '88 Wag (360) around. If it leaks it's fine as long as I can run it a little while to move it around. If you still have it let me know and what you'd want for it. (And if you're going to have the room.)

If anybody else has a super-cheap/free radiator let me know. Like I said above, minor leaks are fine I just need something to move a Jeep around my property with. I donated its original to someone as a favor.
If all goes well I will be trailering the Jeep this year and should have room. I will bring it along.
Not sure if we'll have the room to bring it home now that we're driving the car out. Tow rig (Excursion) has issues we just discovered and there's not enough time to do all the necessary work to get plates on the Explorer. The 2 possible FSJs also need work and plates that we won't be able to complete in time. :( We'll know how much room after we pack the car Saturday, though!

Re: 2016 parts

Posted: Wed Jul 06, 2016 7:25 am
by will e
AMCdealer wrote:
will e wrote:
AMCdealer wrote:
I need a really cheap radiator so I can run/move the Joplin tornado victim '88 Wag (360) around. If it leaks it's fine as long as I can run it a little while to move it around. If you still have it let me know and what you'd want for it. (And if you're going to have the room.)

If anybody else has a super-cheap/free radiator let me know. Like I said above, minor leaks are fine I just need something to move a Jeep around my property with. I donated its original to someone as a favor.
If all goes well I will be trailering the Jeep this year and should have room. I will bring it along.
Not sure if we'll have the room to bring it home now that we're driving the car out. Tow rig (Excursion) has issues we just discovered and there's not enough time to do all the necessary work to get plates on the Explorer. The 2 possible FSJs also need work and plates that we won't be able to complete in time. :( We'll know how much room after we pack the car Saturday, though!
If I am towing the rig I will have plenty of room to bring it and take it back home if you don't have the room. No worries.

Re: 2016 parts

Posted: Wed Jul 06, 2016 9:03 pm
by jsinajeep
I have a set of front and rear seats and console that fold forward from a Cherokee if anyone interested
in them I can bring to Ouray

Re: 2016 parts

Posted: Thu Jul 07, 2016 6:09 am
by csuengr
A bit late to the party. I have a K&N filter for a stock air cleaner assembly. Currently dirty. Also have the air cleaner assembly. I have a complete set of front axle shafts for a passenger drop wide track D44. Full set of side glass for a Grand Wagoneer. A good NP229.

Re: 2016 parts

Posted: Thu Jul 07, 2016 1:13 pm
by Grand_Wag_85
How much for the 229?

Re: 2016 parts

Posted: Thu Jul 07, 2016 3:49 pm
by csuengr
I was thinking $50. Do you need the shift motor? I have a good one of those also.