Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Traced all wiring to new homes on the engine today. Got the new alternator in. Put in new tierods and buttoned up steering linkage. Won’t be long now!!!
Sent from my iPhone using Tapatalk
'95 YJ D-60s/350SBC/SM420/NP231SYE/Coilovers
'12 JK Rubicon 3" and 35s (wife's daily driver)
'47 CJ2A L-Head (wedding present)
'78 J10 my daily driver
'77 J10 "soon to be" rock crawler
'53 M38A1 stock Marine
'45 MB new to the fleet
Adventure_Wagon88 wrote:Wow beautiful work. Love the combo 401/T18/D20
Thanks as for the “work” comment. I couldn’t be happier with how the underside is coming along. Now if the topside just matched....
Sent from my iPhone using Tapatalk
'95 YJ D-60s/350SBC/SM420/NP231SYE/Coilovers
'12 JK Rubicon 3" and 35s (wife's daily driver)
'47 CJ2A L-Head (wedding present)
'78 J10 my daily driver
'77 J10 "soon to be" rock crawler
'53 M38A1 stock Marine
'45 MB new to the fleet
'95 YJ D-60s/350SBC/SM420/NP231SYE/Coilovers
'12 JK Rubicon 3" and 35s (wife's daily driver)
'47 CJ2A L-Head (wedding present)
'78 J10 my daily driver
'77 J10 "soon to be" rock crawler
'53 M38A1 stock Marine
'45 MB new to the fleet
Anyone have any luck getting this trim off, then more importantly back on?
Sent from my iPhone using Tapatalk
'95 YJ D-60s/350SBC/SM420/NP231SYE/Coilovers
'12 JK Rubicon 3" and 35s (wife's daily driver)
'47 CJ2A L-Head (wedding present)
'78 J10 my daily driver
'77 J10 "soon to be" rock crawler
'53 M38A1 stock Marine
'45 MB new to the fleet
Fired up today for the first time. All went well with the engine, having trouble getting fuel from tank though. New pump/lines/tank... never dull
Sent from my iPhone using Tapatalk
'95 YJ D-60s/350SBC/SM420/NP231SYE/Coilovers
'12 JK Rubicon 3" and 35s (wife's daily driver)
'47 CJ2A L-Head (wedding present)
'78 J10 my daily driver
'77 J10 "soon to be" rock crawler
'53 M38A1 stock Marine
'45 MB new to the fleet
Got the p/s cleaned, sandblasted, painted, and rebuilt. Got it hung on the motor along with a cleaned up crank pulley.
Sent from my iPhone using Tapatalk
'95 YJ D-60s/350SBC/SM420/NP231SYE/Coilovers
'12 JK Rubicon 3" and 35s (wife's daily driver)
'47 CJ2A L-Head (wedding present)
'78 J10 my daily driver
'77 J10 "soon to be" rock crawler
'53 M38A1 stock Marine
'45 MB new to the fleet
Bad news... figured out the fuel pump issue, but now I’ve got lots of smoke coming from oil fill cap vent on cranking. I’m assuming from crankcase overpressure due to failed rings. Compression test shows: 1-139, 2-140, 3-126, 4-150, 5-132, 6-140, 7-140, 8-170. So, I’m calling the engine builder this morning as it may be coming back out.
Sent from my iPhone using Tapatalk
'95 YJ D-60s/350SBC/SM420/NP231SYE/Coilovers
'12 JK Rubicon 3" and 35s (wife's daily driver)
'47 CJ2A L-Head (wedding present)
'78 J10 my daily driver
'77 J10 "soon to be" rock crawler
'53 M38A1 stock Marine
'45 MB new to the fleet
Called engine builder. He thinks they’re washed too. Could be head gasket, could be partial ring(s). Need to take it back.
Sent from my iPhone using Tapatalk
'95 YJ D-60s/350SBC/SM420/NP231SYE/Coilovers
'12 JK Rubicon 3" and 35s (wife's daily driver)
'47 CJ2A L-Head (wedding present)
'78 J10 my daily driver
'77 J10 "soon to be" rock crawler
'53 M38A1 stock Marine
'45 MB new to the fleet
REDONE wrote:Did you do the compression test wet? Those numbers are pretty high for failed rings, but too much variation if the test was done wet.
Ya, “moist” I used a shot or 2 of WD40.
Sent from my iPhone using Tapatalk
'95 YJ D-60s/350SBC/SM420/NP231SYE/Coilovers
'12 JK Rubicon 3" and 35s (wife's daily driver)
'47 CJ2A L-Head (wedding present)
'78 J10 my daily driver
'77 J10 "soon to be" rock crawler
'53 M38A1 stock Marine
'45 MB new to the fleet
Got all the external engine parts broken down last night. Going to pull tomorrow.
Sent from my iPhone using Tapatalk
'95 YJ D-60s/350SBC/SM420/NP231SYE/Coilovers
'12 JK Rubicon 3" and 35s (wife's daily driver)
'47 CJ2A L-Head (wedding present)
'78 J10 my daily driver
'77 J10 "soon to be" rock crawler
'53 M38A1 stock Marine
'45 MB new to the fleet
Man I like that rig. I am not sure I would paint it. New tires / wheels and interior and the faded orange on that perfect rust free rig looks so right.
Very nice looking truck!!! Great work and nice build!! Are those the "short" Hedman Headers?? Looks like they fit nice. Looking to upgrade my 79 J-20!!
1979 J20, 360 w/NV4500/D300 Twin Stick/3.73 SOLD
1978 Cherokee Chief W/T Levi interior, 360 Q/T. SCRAPPED
1970 Gladiator J4800 Camper Special, Buick 350, 4spd. SOLD
Fast Eddie wrote:Very nice looking truck!!! Great work and nice build!! Are those the "short" Hedman Headers?? Looks like they fit nice. Looking to upgrade my 79 J-20!!
Thanks. It was coming along nicely before this mild set back. The headers are Patriot Clippster Headers H8600-1. So far so good, and I can pull all 8 plugs without insane tools and the flanges are pretty stout.
Sent from my iPhone using Tapatalk
'95 YJ D-60s/350SBC/SM420/NP231SYE/Coilovers
'12 JK Rubicon 3" and 35s (wife's daily driver)
'47 CJ2A L-Head (wedding present)
'78 J10 my daily driver
'77 J10 "soon to be" rock crawler
'53 M38A1 stock Marine
'45 MB new to the fleet
So.... it’s been a while other projects and stuff. But I’m under the J10 today fitting some exhaust for welding.
Sent from my iPhone using Tapatalk
'95 YJ D-60s/350SBC/SM420/NP231SYE/Coilovers
'12 JK Rubicon 3" and 35s (wife's daily driver)
'47 CJ2A L-Head (wedding present)
'78 J10 my daily driver
'77 J10 "soon to be" rock crawler
'53 M38A1 stock Marine
'45 MB new to the fleet
Driver side is straightforward mocked up/clamped header to muffler. Passenger was a bit more complicated... but I snaked off the header through the hole made up by tcase/frame/xmember/body pretty well.
Sent from my iPhone using Tapatalk
'95 YJ D-60s/350SBC/SM420/NP231SYE/Coilovers
'12 JK Rubicon 3" and 35s (wife's daily driver)
'47 CJ2A L-Head (wedding present)
'78 J10 my daily driver
'77 J10 "soon to be" rock crawler
'53 M38A1 stock Marine
'45 MB new to the fleet
Im building my first Custom exhaust and had to use 4 - 45 degree pieces to make two 4" offsets on the main runners. Unfortunately, the 4 sets of 180 degree bends wont be used. I ran 2.5" into a Single 3.5" FlowMaster. Mostly stock 360 motor in a Truck.
rocklaurence wrote:Im building my first Custom exhaust and had to use 4 - 45 degree pieces to make two 4" offsets on the main runners. Unfortunately, the 4 sets of 180 degree bends wont be used. I ran 2.5" into a Single 3.5" FlowMaster. Mostly stock 360 motor in a Truck.
I thought about going to a single, but ended up with a cross over behind the tcase and duals behind the axle. What did you do about a tip, just run the pipe out the side?
Sent from my iPhone using Tapatalk
'95 YJ D-60s/350SBC/SM420/NP231SYE/Coilovers
'12 JK Rubicon 3" and 35s (wife's daily driver)
'47 CJ2A L-Head (wedding present)
'78 J10 my daily driver
'77 J10 "soon to be" rock crawler
'53 M38A1 stock Marine
'45 MB new to the fleet