Full Size Jeep Network

So, the cancel cam on my turn signals went crunch making a turn the other day. My question is, is it worth replacing the whole turn signal assembly or just the plastic cam?

Thanks

In my experience the entire assembly. However find an AC Delco replacement. You will wear yourself out installing the generic Chinese ones over and over. Last one I did after 4 Chinese ones that never worked correctly, sourced an AC one and never looked back.

anyone have a part# that I can search for?

Here’s the one I’ve been using.

https://www.amazon.com/ACDelco-D6262D- ... 7+Jeep+J10

You want the cam or the switch?

Should be the same as a GM car. Likely the DOrman part will work - https://www.dormanproducts.com/p-4057-83232.aspx Any parts store can get Dorman stuff.

Thanks guys

Thanks Yeller, I bought the same part as you listed and had it changed in 30 minutes. All good to go now.

Your welcome! Glad it worked for you