Full Size Jeep Network

Stick wrote: ↑Sat Jul 15, 2023 11:16 am

Not at all, sometimes one has to assert to get what they want. I wish I would have learned this at a younger age.

While I have been truthful, I have not explained completely.

There is another fellow interested in the roll bar however he also wants several more parts including an engine. This is very appealing to me. He is also happy to assist extracting the roll bar, a process that may take two hours.

None of this matters at this time however. I simply don’t have time for this project. If the axles come out there will be other parts I will want to remove and rearranging done, no time for that now, perhaps in two or three months.

Thank you for the update. I hope you decide to sell me the roll bar when it becomes accessible.

Last weekend I changed my travel plans from Atlanta to Detroit. Now I will be flying into / out of Detroit instead of driving.

That said I would like to buy the drive shaft and AC hoses. I also thought of 1 other part I have not been able to find that you may have...the small "C" shaped bracket behind a 3-piece bumper. I could come to Farmington Hills Monday Tuesday or Wednesday after work.

Please let me know if that is OK.

Mopar_guy wrote: ↑Sat Jul 15, 2023 1:37 pm Would you have a dash pad for a 83 Grand Waggy? Color is not important as I'm doing a custom color. I can pick it up as well.

Waggy82 wrote: ↑Sat Jul 15, 2023 3:51 pm

threepiece wrote: ↑Fri Jul 14, 2023 6:13 pm

Waggy82 wrote: ↑Fri Jul 14, 2023 7:14 am Where about the metro Detroit area? I am looking for a frame for a 82.

I do have what I believe is a 1982 Wagoneer that I may be parting out. It is from Montana, I expect the frame is in good to very good condition. It has I6 engine brackets too. I also have a reasonably nice frame from a 1979. This is somewhat different but could be made to work with a bit of effort. All this in Farmington Hills.

Wow that is cool that you are this close. I can be in Farmington Hills in a hour or so. I am working on a list of parts I need. If you decide to part our please let me know as I would be interested in swinging in to take a look. Sounds like you have a lot of stuff for these things.

threepiece wrote: ↑Sat Jul 15, 2023 8:33 pm

Mopar_guy wrote: ↑Sat Jul 15, 2023 1:37 pm Would you have a dash pad for a 83 Grand Waggy? Color is not important as I'm doing a custom color. I can pick it up as well.

Is it safe to assume your “Waggy” Has a drop down pad on the right side? Virtually every Wagoneer I have seen has one. If so I have several dash pads ranging from poor to nice condition.

threepiece wrote: ↑Sat Jul 15, 2023 8:28 pm

Stick wrote: ↑Sat Jul 15, 2023 11:16 am

Not at all, sometimes one has to assert to get what they want. I wish I would have learned this at a younger age.

While I have been truthful, I have not explained completely.

There is another fellow interested in the roll bar however he also wants several more parts including an engine. This is very appealing to me. He is also happy to assist extracting the roll bar, a process that may take two hours.

None of this matters at this time however. I simply don’t have time for this project. If the axles come out there will be other parts I will want to remove and rearranging done, no time for that now, perhaps in two or three months.

Thank you for the update. I hope you decide to sell me the roll bar when it becomes accessible.

Last weekend I changed my travel plans from Atlanta to Detroit. Now I will be flying into / out of Detroit instead of driving.

That said I would like to buy the drive shaft and AC hoses. I also thought of 1 other part I have not been able to find that you may have...the small "C" shaped bracket behind a 3-piece bumper. I could come to Farmington Hills Monday Tuesday or Wednesday after work.

Please let me know if that is OK.

Yes, Monday, Tuesday or Wednesday afternoon is good for me. I will try to send a Message to you with more detail.

threepiece wrote: ↑Sat Jul 15, 2023 8:41 pm

Waggy82 wrote: ↑Sat Jul 15, 2023 3:51 pm

threepiece wrote: ↑Fri Jul 14, 2023 6:13 pm

I do have what I believe is a 1982 Wagoneer that I may be parting out. It is from Montana, I expect the frame is in good to very good condition. It has I6 engine brackets too. I also have a reasonably nice frame from a 1979. This is somewhat different but could be made to work with a bit of effort. All this in Farmington Hills.

Wow that is cool that you are this close. I can be in Farmington Hills in a hour or so. I am working on a list of parts I need. If you decide to part our please let me know as I would be interested in swinging in to take a look. Sounds like you have a lot of stuff for these things.

I don’t expect to be dealing with that Wagoneer this year. I’m also not sure about parting it out. I might sell it whole.

threepiece wrote: ↑Sat Jul 15, 2023 8:28 pm

Stick wrote: ↑Sat Jul 15, 2023 11:16 am

Not at all, sometimes one has to assert to get what they want. I wish I would have learned this at a younger age.

While I have been truthful, I have not explained completely.

There is another fellow interested in the roll bar however he also wants several more parts including an engine. This is very appealing to me. He is also happy to assist extracting the roll bar, a process that may take two hours.

None of this matters at this time however. I simply don’t have time for this project. If the axles come out there will be other parts I will want to remove and rearranging done, no time for that now, perhaps in two or three months.

Thank you for the update. I hope you decide to sell me the roll bar when it becomes accessible.

Last weekend I changed my travel plans from Atlanta to Detroit. Now I will be flying into / out of Detroit instead of driving.

That said I would like to buy the drive shaft and AC hoses. I also thought of 1 other part I have not been able to find that you may have...the small "C" shaped bracket behind a 3-piece bumper. I could come to Farmington Hills Monday Tuesday or Wednesday after work.

Please let me know if that is OK.

Yes, Monday, Tuesday or Wednesday afternoon is good for me. I will try to send a Message to you with more detail.

Stick wrote: ↑Tue Jul 18, 2023 12:34 pm

threepiece wrote: ↑Sat Jul 15, 2023 8:28 pm

Stick wrote: ↑Sat Jul 15, 2023 11:16 am Not at all, sometimes one has to assert to get what they want. I wish I would have learned this at a younger age.

While I have been truthful, I have not explained completely.

There is another fellow interested in the roll bar however he also wants several more parts including an engine. This is very appealing to me. He is also happy to assist extracting the roll bar, a process that may take two hours.

None of this matters at this time however. I simply don’t have time for this project. If the axles come out there will be other parts I will want to remove and rearranging done, no time for that now, perhaps in two or three months.

Thank you for the update. I hope you decide to sell me the roll bar when it becomes accessible.

Last weekend I changed my travel plans from Atlanta to Detroit. Now I will be flying into / out of Detroit instead of driving.

That said I would like to buy the drive shaft and AC hoses. I also thought of 1 other part I have not been able to find that you may have...the small "C" shaped bracket behind a 3-piece bumper. I could come to Farmington Hills Monday Tuesday or Wednesday after work.

Please let me know if that is OK.

Yes, Monday, Tuesday or Wednesday afternoon is good for me. I will try to send a Message to you with more detail.

I have not received a PM or and email or a text. Can you please send me more detail.

Thanks

threepiece wrote: ↑Fri Apr 21, 2023 8:49 am

dljlobos wrote: ↑Tue Apr 18, 2023 1:26 pm Hello, Do you have any 1980 or newer J10 axles available? I'm looking for the front with the driver side drop Dana 44, and the rear centered AMC 20. Thanks

I have been loading axles onto my truck headed to the scrap yard. The 1982 J10 axles happen to be on top of the pile. The front has the vacuum disconnect apparatus. Both axles for $80. You can have the control unit on the dashboard too.