Main features:
- waterproof relay box
- two 35A micro ISO relays
- separate 20A mini fuses for high and low beams
- ceramic H4 sockets
- 12 gauge high quality GXL wire (16 gauge for trigger signals)
- durable nylon braided mesh protects wiring from chafing
- two mounting options - angled (with two sheet metal screws) or horizontal (plate with adhesive tape)
- no splicing needed for installation
Installation is easy and doesn't require soldering or splicing - harness plugs into stock headlight socket behind passenger side lamp, then you connect lamp with sockets on the harness and connect 12V and ground feed ring terminals. 12V power supply (red wire) should be connected to alternator output (stud on alternator) or to starter relay stud (1986+ only). Relay box installs on the passenger side fender with either screws or supplied mounting plate.
Relay kits (tailgate, windows or locks)
I'm not making them anymore, but Josh runuover86gw makes an improved, plug and play version.
Check out his kits at his Facebook page - https://www.facebook.com/JoshsFSJRelayKits
3D printed parts
Tailgate glass bumpers - $5 for pair
Bumpers go inside the tailgate and prevent tailgate glass from slamming on metal horns when it is lowered. If yours are dry or gone and you're installing tailgate relays it would be a good time to replace those.
3D-printed from TPU (Thermoplastic Polyurethane), they are flexible and resistant to abrasion, grease and oil. Installation should take no more than a couple minutes once you have tailgate access door off.
Here's a picture of bumper installed:
Door handle/armrest repair insert - $5 for pair (3MF files: left and right)
Used to fix door handle that got broken from pulling too hard on it or over tightened screws. 1 pair does 1 handle. For more details on repair check this post
Tailgate wiring grommet - $5 for pair
Protects tailgate wiring from chafing. Grommets are specifically sized for that opening in the tailgate, are easy to install with RTV and cover metal edges.
Here is how it looks installed (not glued yet though)
If you have any questions or want to order - ask in this thread or shoot me a PM