Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
These are the small plastic pieces at the upper corners of the windshield and rear window that are held on by a single screw each. Ideally in black, but any color is fine and I’ll paint. Pictures of what I need are attached. Shipped to 94403.
Thank you
You do not have the required permissions to view the files attached to this post.
1980 Cherokee Chief Widetrac, amc360, 727, currently building
1988 Grand Wagoneer, amc360, 727 mostly original and passed smog
These could be made with a 3D printer, but might still be some out there.
I know I will need some too as mine turned to dust when I pulled my headliner down a few months back.
Might need to whittle some out of wood.
'81 CJ5 Base, 258 I6, MC2100, T176 4 spd, 300 TC, D30 Front NT, 3.31, 2-Piece AMC 20 rear NT, 3.31, 4" high arc spring lift
'84 Grand Wagoneer, 401 V8 (.030 over), Edelbrock clone 1406, 727 auto, Selec-trac NP229, AMC 20 REAR - D44 FRONT - WT 3.31, 4" high arc spring lift
Rather be driving, than waiting to be modified
One of my fronts broke and I misplaced half of it so I carved some patterns and heat formed them out of ABS. Kinda crude but got used to them and I never look at them anyway. The originals didn't look much better since they were deformed from the heat.
Sic friatur crustulum
'84 GW with Nissan SD33T, early Chev NV4500, 300, narrowed Ford reverse 44, narrowed Ford 60, SOA/reversed shackle in fornt, lowered mount/flipped shackle in rear.
SJTD wrote: ↑Sat Aug 12, 2023 12:23 pm
One of my fronts broke and I misplaced half of it so I carved some patterns and heat formed them out of ABS. Kinda crude but got used to them and I never look at them anyway. The originals didn't look much better since they were deformed from the heat.
Interesting. What thickness ABS did you use?
1980 Cherokee Chief Widetrac, amc360, 727, currently building
1988 Grand Wagoneer, amc360, 727 mostly original and passed smog
I have these. Let me look for all 4. But i know i have them all. Invluding the plastic center brace and metal trim. Also have the two coat hangars too.
The coat hangars will be an orange color. The plastic corners youre looking for will be the cordovan.
Lemme know if interested still. Ill go in my shop and look but i know i have them
1998 Jeep Grand Cherokee 5.9L Limited 219k
1998 Jeep Grand Cherokee 4.0 I6 laredo 430k
1990 Jeep Grand Wagoneer 155k
1976 Jeep J10.. 85k(repaired)
Ok i found thrm. Guess i have 3 of one and one of another. And two cordovan coat hangars.
The lone one corner does hsve a split in it slightky. But not noticable nore really important.
But i have 3 of the front. 1 of the rear. Or is it 3 rear 1 front not sure.
Cant find the 2nd one. Dunno if youre interested in the 3 or 4. And coat hangars ? Let me know. I mist have the missing pairs somewhere but i cant find em right now.
You do not have the required permissions to view the files attached to this post.
1998 Jeep Grand Cherokee 5.9L Limited 219k
1998 Jeep Grand Cherokee 4.0 I6 laredo 430k
1990 Jeep Grand Wagoneer 155k
1976 Jeep J10.. 85k(repaired)
SJTD wrote: ↑Sat Aug 12, 2023 12:23 pm
One of my fronts broke and I misplaced half of it so I carved some patterns and heat formed them out of ABS. Kinda crude but got used to them and I never look at them anyway. The originals didn't look much better since they were deformed from the heat.
Interesting. What thickness ABS did you use?
Used 1/16".
Sic friatur crustulum
'84 GW with Nissan SD33T, early Chev NV4500, 300, narrowed Ford reverse 44, narrowed Ford 60, SOA/reversed shackle in fornt, lowered mount/flipped shackle in rear.