Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Decided to tackle the wobbly tilt on the steering column today. I have been putting it off for a long time just because the whole thing looked pretty...
Last post
I do as much as I can to make sure my kids think I'm a loon. 8-} The reaction is priceless...
I would like to put a tilt steering wheel column that came out of (what I am told) is a mid 70s J truck into my 71 Gladiator. Are these compatible or...
Last post
I'm putting a Comanche tilt autoshift Column in my '84 J10 to operate the AW4 trans. The cable linkage works better than the jury rigged notch I cut...
Okay well Cherokee has been running like a top, except on start up and oil leaks, exhaust leaks, but otherwise it runs good.
So when it sits shut...
Last post
If you are leaking from the oil pressure relief spring retaining bolt, replace the crush washer that sits between the housing and the retaining bolt....
Just started driving the 73 Wag again and I realized that the TH400 won't shift into third gear. No evidence (sound) of anything wrong, and it shifts...
I'm getting a voltage drop to my coil, reading 7.83v with the key on. Checked the pickup and the ignition module, they checked out. Checked the coil,...
Last post
Anything in the house brand is probably crap! I bought a Borg Warner Select the second time around, you could look at it an see the better quality!...
I can see my work bench for the first time in a couple months. Seeing Parts Bob was cleaning up his seemingly clean garage, I decided I need to clean...
I hope this doesn't post twice. I messed up some how and cannot find my previous post. But here goes again anyway.
I have a 360 with 4 barrel Holley...
Last post
Refer to this page to find where to look for the list number/part number for your particular carb.
From that it can be determined what setting and...
The part number for my oil sender is PS151, but I already have a PS150, which looks identical except for the terminal. The stock one has a threaded...
Last post
The one in Krista's Phoebe has failed 3 or 4 times in 11 years. I used to get the right one at NAPA or Autozone but the one I changed in 2010 had the...
Just changed the waterpump a month ago. I'm think'n the change in coolant pressure is causing the coolant to find all the weak spots.
Is it just the...
Last post
Is cast into one of the front runners as I recall. But really, there are not many made. Yours looks to be a performer intake. And its either with or...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
